Complaint
Waste Engine Oil Distillation To Diesel Red Diesel Oil Decolorization Recycling Machine
Waste oil distillation plant distills the incoming crude oil, waste oil or lubrication oil into useful products such as diesel oil and fuel oils, gasoline or petrol, jet fuel, etc, the oil yield will be 85%-90%, the by-products are 10%-15% slag and syngas.
The raw material for waste oil recycling machine
1) crude oil of waste plastics, waste rubber refining
2) waste oil such as: waste diesel engine oil, waste oil, waste slag, etc
3) waste crude oil
4) waste wash a oil
The final product after distillation
No. | End Production | Yield | Usage |
1 | Diesel | 73% | Used for diesel engine |
2 | Gasoline | 12% | Used for gasoline engine |
3 | Residue Oil | 9% | * Feeding into Pyrolysis Machine for second Pyrolysis * Sold directly for building road |
4 | Non-Condensible Gas | 3% | Recycle as Heating fuel after treated by Gas-treatment System |
5 | Other | 3% | * Water and impurity 2% * Loss 1% |
Working Process of Waste Oil Distillation Machine
1. Heat the heat conduction oil with the heat conduction oil furnace;
2. The heat conducting oil flows into the coil in the distillation reactor and heats the waste engine oil in the distillation reactor;
3. When the waste engine oil is heated to a certain temperature, the reactor is directly heated with fuel. As the temperature increases, the waste engine oil produces oil and flows into the buffer tank. The odorous light components in the waste engine oil can be distilled and collected into the distillation tank.
4. The oil gas from the buffer tank enters the catalytic tower. In the catalytic tower the macromolecular oil gas are broken down into smaller molecules .
5. Oil gas of small molecules enter the cooling system through the catalytic tower and are cooled into liquid oil;
6. After the oil gas steam out, the distillation reactor memory has plenty of hot asphalt, which can be extracted by the asphalt pump.
Item | Contents | |
Input-Raw Materials | Waste engine/motor oil/Lubrication oil | |
Average out-put oil rate | 85%-90% | |
By-products | Diesel oil, waste gas, slag | |
Structure form | Horizontal | |
Operating pressure | Constant pressure | |
Heating material | Coal, charcoal, fuel gas, fuel oil | |
Model(Diameter*Length)(mm) | Reactor size | Capacity |
D1500*L3000 | 3 Ton/Day | |
D2000*L5000 | 5 Ton/Day | |
D2800*L6000 | 10 Ton/Day | |
Material of reactor | Q245R&Q345R boiler plate | |
Thickness of reactor | 16mm, 18mm | |
Mode of cooling | Circulating water cooling | |
Space needed | Length: 30m, Width :10 m at most | |
Power consumption | Average 15 KW/h | |
a. The complete set of unit produces no smoke and smell with favourable effects of environmental protection.
b. The pressure release device operates through water circulation, which greatly improves the security of the system.
c. The release of pressure during the production dramatically increases the output within certain time.
d. The heating system adopts hot air heating technology, which improves the safety performance of production and heating efficiency.
e. High efficiency fuel gas heating system to save energy greatly.
total production consumption
1. Power: 18KW to higher KW/hour in total (but it is not every device start at the same time).
2. Cooling circuit water: 50m3/hour in total (the water can be recirculated and the more the water flow, the better the cooling down).
3. Fuel for heating: 50-60KG coal for processing one ton raw oil for average.
4. Space for machine: 200 square meter or more (depends on real machine required.
Final Diesel Oil Report After Distination
| Project | Diesel | Standard |
| Oxidation stability | 2.2 | ≤2.5mg/100ml |
| Sulfur content(%) | 0.3 | M/m ≤0.2 |
| 10% steamed residual carbon residue (%) | 0.33 | M/m ≤0.3 |
| Ash content (%) | 0.16 | %M/m ≤0.01 |
| Water content (%) | traces | / |
| Mechanical impurities | / | / |
| Density (G/ML) | 0.85 | 0.83-0.87 |
| Solidifying point(ºC) | -10 | 0 |
| Flash point (closed )(ºC) | 45 | 55 |
| Movement viscosity | 3.5 | (20ºC ) mm2/s 3.0-8.0 |
| Combustion value(Kcal) | 9500 | 8500 |
| Colority | 1.2 | ≤3.5 |
| Cetane number | 40 | 45 |
| Acidity | / | Mgkoh/100ml≤7 |
Q: What is the yield of this Waste Oil Recycling To Diesel Plant?
A: Typically the yield of our Waste Tire Pyrolysis Oil Distillation plant is between 85-90% (depending on variations of water content, light HC and others ingredients from waste oil.)
Q: what is the application of this waste oil distillation plant?
A: it is used for used engine oil, used motor oil, tyre oil,plastic oil, pyrolysis oil and other industrial oils.
Q: what is the capacity of used oil distillation plant?
A: the processing capacity is about 5ton, 10ton, 20ton, 30ton per day.
Q: is there any additive used inside?
A: yes, there will have additive use inside on the refining process, which is to further restoring the output oil
Q: what is the heating method of waste oil refining plant?
A: heating method is customized by customer, we support electric heating, fuel oil heating and gas heating.
