23dBm Lte700+GSM900 Dual Band Selective Booster for Australia (GW-23LG)

Min.Order: 1
Product origin: Shenzhen, Guangdong, China
Infringement complaint: complaintComplaint
US$ 165.6 ~ 189.3

Description
23dBm Lte700+GSM900 Dual Band Selective Booster for Australia (GW-23LG)

Model: GW-23LC

Indoor Dual Band Signal Repeater (Signal Booster) series is an ideal solution for both two wireless system in small/medium businesses and home users looking to enhance indoor 2G&3G wireless connectivity. It is connected via coaxial cable to Dual Band Donor Antenna and Service Antenna, Dual Band Donor Antenna is placed outside the building where it has easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio coverage to the blind area.And Automatic Gain Control (AGC) to avoid the Booster from over saturation, therefore maintaining a high voice quality and avoid adding interference to network. With good looking & super compact design also make it attractive. Besides, it is easy installation feature is also for individual customers to install the booster by themselves, and it does not need much professional knowledge and instrument.
The dualband improves mobile signals with no negative impact on human health.
 
Features:
1. Cost effective solution for weak signal zones, reduce drop/off calls.
2. Compact size, low power consumption, easy installation, great cover.
Expansion and extention of the signal of base station. Optimization of the quality of the signal and source
3. Cover about 500~1500m² Without block or obstruct.
4. High linear design, ALC function design, low interference to BTS.
5. Support any cellular devices (voice & data & video)
6. Wide band signal booster, or customize selective band booster.
7. Support System CDMA800, GSM, DCS, PCS, WCDMA, LTE 4G etc


Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters,It is a simple, safe and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.

Standard Package:
1) AC90-264V, DC9V/5A power supply adapter 1PCS
2) AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
3) Installation kit 1PCS
4) User manual 1PCS

Recommended Accessories:
1) Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
2) Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
3) 5D-FB coaxial cable with connecter (Cable length optional)

 Advantages:
1. Smart Function, Intelligent mode setting
smart function called which can be activated via the front panel.
users can adjust gain and choose working band by LED panel, This smart function is easier than DIP Switch, can set up parameters,It is a simple, safe and effective way.
2. Auto Level Control
The 30dB ALC is used to maintain steady output power even when the donor source signal fluctuates.

Application:
To expand signal coverage of fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.


 
Frequency RangeUplinkDownlink
GSM900+DCS1800890- 915/1710 - 1785MHz935- 960/1805- 1880MHz
GSM850+PCS1900824 - 849/1850- 1910MHz869- 894/1930- 1990MHz
GSM900+WCDMA890- 915/1920 - 1980MHz935- 960/2110- 2170MHz
LTE700+GSM900699-716/890-915MHz729-746/935-960MHz
LTE800+LTE2600832- 862/2500 - 2570MHz791- 821/2620 - 2690MHz
GSM850+AWS1700824 - 849/1710 - 1755MHz869- 894/2110 - 2155MHz
Max. Gain70dB75dB
Max. Output Power20dBm23dBm
Band widthWide Band
Manual Gain Control31dB    / 1dB Step
Automatic Gain Control>20dB
Ripple in-band≤ 6dB
Return loss≤ -10dB
Noise Figure≤ 6dB
Spurious Emission
&Intermodulation
9KHz~1GHz≤ -36dBm
1~12.75GHz≤ -30dBm
WCDMASpurious Emission MaskMeet 3GPP TS 25.143 ( V 6.2.0 )
Modulation Accuracy≤ 12.5%
Peak Code Domain Error≤ -35dB@Spreading Factor 256
Time Delay≤ 1.5 μs
Frequency stability≤ 0.01ppm
MTBF> 50000 hours
Power SupplyAC100-240V,DC9V/5A
Power LEDPower indicator
Impedance50 ohm
Alarm LEDRedAutoexcitation or High Power
GreenStandard
Mechanical Specification
RF ConnectorN-Female
SwitchPower Switch\Manual Gain Control Switch
CoolingHeatsink Convection cooling
Humidity< 90%
Operating Temperature-10°C~55°C
Environment ConditionsIP40
Installation TypeWall Installation
Size268mm*58mm*189mm
Weight< 3.5Kg

Method of Installation:
The booster is fixed onto the wall through expansion bolts.
A.  Drill holes on the selected place and install expansion bolts.
B.  Align the holes with the expansion bolts, place flat washers, spring washers, and nuts in turn, and tighten the nuts to fasten the installing support.
C. Place the booster on and fasten it.
D. Connect cables and power cables to the booster respectively.
 E. After installing the booster as described above, power on the booster to check the operation status.


Connection
A.  BTS Port: donor antenna cable is connected with Outdoor Port;
B.  MS Port: service whip antenna is connected with Indoor Port;
C.  DC IN: connected with Power adaptor.

Product Tag:
Related categories:
Scroll to Top