Synthetic Detergent Spray Drying Equipment

Min.Order: 1
Product origin: Changzhou, Jiangsu, China
Infringement complaint: complaintComplaint
US$ 10000 ~ 2000000

Description
Product Description

 

INTRODUCTION
YPG pressure spraying (cooling) dryer uses a pressure atomizer, by means of the pressure of a diaphragm pump to atomize solution or slurry materials into fine droplets, thus significantly increase the surface of materials and rapidly dries materials through a full heat exchange with hot air, to obtain fine articles or powder product.

WORKING PRINCIPLE
Operation process of this unit is that liquid is input under high pressure through the diaphragm pump, and then becomes mist to be discharged, decreasing in cocurrent flow with hot air. Most particles are collected by discharge opening in the bottom of the tower, while exhausts gas and fine powder are separated by cyclone separator, with exhausts gas discharged from the exhaust fan and powder collected by collecting canister in the lower end of the cyclone separator. Fan outlet can also be equipped with secondary dust removal devices, with a recovery rate of over 96-98%.

FEATURES
Fast drying speed; greatly increasing surface area of liquid after atomization; in a stream of hot air can instantly evaporate 95% -98%of water; it takes only ten to dozens of seconds to complete drying; especially suitable for drying heat-sensitive materials.
All products are spherical particles, in uniform size, with good mobility, good solubility, high purity and good quality.
Widely used; depending on the characteristics of the material it can dry with both hot air and cold air; strong adaptability to the materials.
Simple and stable operation, easy to control and realize automated job.

APPLICAITON
Spray drying grain:
Chemical: catalyst, resin, synthetic detergent, oil, sulfur, ammonium, dyes, dye intermediates, white carbon black, graphite, ammonium phosphate and so on.
Food: amino acids and the like, quelite, protein, starch, dairy products, coffee aspirate, fish meal, meat powder and so on. 
Pharmacy: Chinese patent medicine, pesticides, antibiotics, medical drinking and so on.
Ceramics: magnesium oxide, clay, various metal oxides, dolomite.
Spray granulation: various ferrite, aluminum oxide, ceramic powder, pharmaceutical, heavy metallic super hardness steel, chemical fertilizer, granular detergent, Chinese patent medicine.
Spray cooling granulation: amino fatty acid, paraffin wax, glycerate, tallow and the like, which is often used in aspect of spray crystallization, spray concentration and spray reaction.

TECHNICAL PARAMETERS

  Model/Item

Unit

YPG-50

YPG-100

YPG-150

YPG-200

YPG-300

YPG-500

YPG-1000

Overall Dimension

kg

50

100

150

200

300

500

1000

Pressure of High-Pressure Pump (Φ×H)

mm

1600× 8900

2000× 11500

2400× 13500

2800× 14800

3200× 15400

3800× 1880

4600× 22500

Water Evaporation

Mpa

2~10

Power

KW

8.5

14

22

24

30

82

30

Temperature

oC

140~350

Moisture Content of Finished Product

%

<5( can be reached to 0.5)

Material Recovery Rate

%

>97

Electric Heater

KW

75

120

150

When the temperature is lower than 200oC,the parameters should be calculated actually.

Eelectricity  + Steam

Mpa+KW

0.5+54

0.6+90

0.6+108

According to the practical condition.

Hot Air Furnace

Kcal/h

100000

150000

200000

300000

400000

500000

1200000

Note:The above evaporation is the maximum evaporation.

WORKING PRINCIPLE


Product Tag:
Related categories:
Scroll to Top