Description
Feature:
a) The unique processing technology used by us makes our products superior than the other product at pasting and die-cutting times. The PVC based matrix can be used for 80000 times, fiber-based about 1200000 to 150000 times and paper base about 1500000 to 180000 times.
b) We use high quality material for the positioning bar with moderate flexibility-easy for operation and accurate position.
c) Imported double-side adhesive tape is easy to be cleaned after die-cut.
d) Linear mouth with good vertical degree.
Creasing Matrix Structure A. Thickness of creasing matrix B. Brute mighty bottom film C. Slot width of creasing matrix D. Positioning plastic strip E. Protection film.Selection Method Of Indentationwhen cutting cardboard the selection method of creasing matrixa) Calculation method:A=The thickness of the creasing matrix B=The slot width of the creasing matrixC=The thickness if the cardboard ≤dd= The thickness of the creasing lineA≤C B=(C*1.5)+db) Cardboard choose table (die-cutting blade height 23.8 mm) Paper
(gsm) | Paper Thickness
(mm) | The height of the creasing line (mm) | Common domestic creasing line |
| 23.50 | 23.40 | 23.30 | 23.20 | 23.10 | 23.00 | 23.24 | 22.90 |
| 200 | 0.28 | 0.3*1.0 | 0.4*1.0 | | | | | 0.5*1.0 | |
| 250 | 0.35 | 0.3*1.2 | 0.4*1.2 | 0.5*1.2 | | | | 0.5*1.2 | |
| 300 | 0.42 | 0.3*1.3 | 0.4*1.3 | 0.5*1.4 | | | | 0.5*1.4 | |
| 350 | 0.50 | | 0.4*1.4 | 0.5*1.5 | 0.6*1.5 | | | 0.5*1.5 | |
| 400 | 0.56 | | | 0.5*1.6 | 0.6*1.6 | | | 0.5*1.6 | 0.8*1.6 |
| 450 | 0.63 | | | 0.5*1.7 | 0.6*1.7 | 0.7*1.7 | | | 0.8*1.7 |
| 500 | 0.70 | | | | | 0.7*1.7 | 0.8*1.7 | | 0.8*1.7 |
Note: The above specification is only recommendation. ▄▄▄ is first choice.For example: cardboard thickness is 0.52mm, creasing line thickness is 0.71mm, the calculation method is A=0.52mm, B=0.52*1.5+0.71=1.49≈1.5mm, so we should choose the size of 0.5*1.5when cutting corrugated paper selection method of creasing matrix.a) Calculation method:A=The thickness of the creasing matrix B=The slotting width of the creasing matrixC=The thickness if the corrugated paperd= The thickness of the creasing linee= The thickness of the corrugated paper after pressingA≤e B=(e*2.0)+db) Corrugated Paper choose table (die-cutting blade height 23.8mm ) | Corrugated paper | Corrugated thickness after press | Height of creasing line | Choose of creasing matrix(1.05 thickness creasing line) | Choose of creasing matrix(1.42thickness creasing line) |
| E Flute | 0.65mm | 23.10mm | 0.7*2.3 | ---- |
| E Flute | 0.75mm | 23.00mm | 0.8*2.5 | ---- |
| B Flute | 0.85mm | 22.90mm | 0.8*2.7 | 0.8*3.2 |
| B Flute | 0.95mm | 22.80mm | 1.0*3.0 | 1.0*3.5 |
| C Flute | 1.05mm | 22.70mm | 1.0*3.2 | 1.0*3.5 |
| C Flute | 1.15mm | 22.60mm | | 1.0*4.0 |
| | | | | |
Complaint
