Auto Density Control Double Pump Cementing Skid

Min.Order: 1

Product origin: Zhenjiang, Jiangsu, China

Infringement complaint:

Complaint

US$ -1

Description

Skid mounted cementing equipment is mainly utilized in offshore or remote areas on land, such as desert where the vehicles are difficult to reach. Three kinds of major cementing plunger pumps of TPA400, TPH400 or TPB600 and variety of plunger size can be selected according to different operating conditions. The unit is fully considered the anticorrosion for offshore application. Zone-II explosion-proof unit is also developed, for the characteristics of offshore platform
I.Overview
Model PCS-521B double pump cementing skid equipped with TPH400 pumps is new generation of cementing unit developed in recent years.
The input shaft of TPH400 pump is paralleled with centre line of engine, so the fluid end is at the rear of unit. This inline installation feature makes the maintenance and service of pumps easier.Compared with other cementing plunger pumps with same plunger size, TPH400 pump has features of maximum operation pressure, long stroke and high self-priming capacity.The high energy mixing system is powered by the transmissions PTOs. The skid is very compact, so it is applicable for the areas with strict requirements for space, such as offshore drilling platform, etc.
This unit is mainly utilized in cementing job, acidizing job, oil well pressure testing, and other fluid pumping job in offshore, on land or desert oilfield.
2. General specification
Max. working pressure: (14,000 PSi W/ 4" Fluid End)
Max. flow: 3.04m³/min (w/two 4 1/2" fluid ends)
Density range: 1.3-2.5g/cm³
Auto control precision: +/-0.02g/cm³
Mixing capacity: 0.3-2.3m³/min
Working ambient temperature: -20°C - 50°C
Overall dimension (mm): 7200(L) x 2500 (W) x 3250 (H)
Net weight: 22000kg

Technical specification
Engine		Caterpillar C13 475 HP@2100 RPM (2 sets)
		Caterpillar C15 540 HP@2100 RPM (optional)
		Detroit S60 475HP@2100RPM (optional)
Transmission		Allision 4700OFS (5 forward gears + neutral gear) (2sets)
Hydraulic system		Driven by transmission PTO, closed loop for c-pumps, open loop for agitators
Triplex pump (2 sets)
Model/type	SERVA TPH400 Reciprocal, horizontal single action plunger pump
Stroke	8"(203.2mm)
Max. B.H.P.	600 BHP (447Kw)
Gear ratio	8.6:1
Fluid End	3 3/8"				4"	4 1/2"
Rated pressure	138MPa				96MPa	77MPa
Max. flow	0.86 m³/min				1.2 m3/min	1.52 m3/min
ACM-IV.1mixing system
Mixer				High energy recirculating mixer
Dry cement valve				off-center bulk cement metering valve
Mixing water pump				SERVA 4X3 (1.5 m³/[email protected])
Recirculating/pressure pump				SERVA RA56 (3.7 m³/[email protected]) (two sets)
Densitometer				Micro Motion 3" F300 non-radioactive densitometer
Computer system				AB PLC
Others
Mixing tank			12 BBL (2 m³)		Fuel tank	900 L
displacement tank			2x10 BBL (2 x1.5 m³)		Hydraulic oil tank	170 L
					Air tank	80L