T-1000s SD Card Programmable LED Pixel Controller

T-1000S SD card led pixel controller

T-1000S System features: 
1). 32~256 Gray level, Support software Gamma correction. 
2). Support the rules and special-shaped handle. 
3). Single-port output, can support 2048 pixels. 
4). Off-line(SD Card) control, play back content stored in the SD card. 
5). T-1000S store a maximum of 16 programs, copy multiple files to the SD card in order, after formatting the SD card as "FAT" format. 
6). The program must be named in orders. Just as: 00_1. Led, 01_1. Led, 02_1. Led. 
7). Compatible with single line or double line chips. 
NOTE: 
1). When T-1000S controller control less than 512 lamps the frame rate can reach 30fps. When T-1000S control more than 512 lamps and less than 2048 lamps the frame rate will slow down automatically. 
2). T-1000S must use the new software LedEdit 2012.

T-1000S SD Card led Pixel Controller
Support Chips:
Chip type	Software code&Controller type	Lamps/(MAX)	Note
LPD6803,D705,1101,6909, 6912	T-1000-6803	2048 pixels
LPD8806,LPD8809	T-1000-8806	2048 pixels
TM1803,TM1804,TM1809,TM1812	T-1000-TM	2048 pixels	TM1804 and TM1809 are divided into high and low
TM1903,TM1904,TM1909,TM1912	T-1000-TM19	2048 pixels
UCS6909,UCS6912,UCS7009,UCS5903	T-1000-UCS-32	2048 pixels
UCS1903,UCS1909,UCS1912	T-1000-UCS-256	2048 pixels	1903 and 1909 are divided into high and low
UCS3903	T-1000-UCS-1024	2048 pixels
DMX512	T-1000-DMX	170/512 pixels	Compatible with standard DMX512
WS2801,WS2803	T-1000-WS	2048 pixels
WS2811	T-1000-WS2811	2048 pixels	WS2811 be divided into high and low
DS189	T-1000-DS189	2048 pixels
TLS3001,TLS3002,TLS3008	T-1000-TLS	* pixels
P9813	T-1000-P9813	2048 pixels
SM16715	T-1000-SM16715	2048 pixels	SM16715 be divided into high and low
SM16716	T-1000-SM16716	2048 pixels
BS0901,BS0902	T-1000-0901	2048 pixels
BS0815	T-1000-0815	2048 pixels
Definition of printing:
Buttons	Meaning
SET	Save Settings (to save current settings file and the playback speed)
MODE	Change programs
SPEED+	Speed up	Press speed+ and speed- at the same time the program will play circularly.
SPEED-	Speed down
DC5V	+5V power input
GND	Power GND input
7.5-24V	+7.5~24V power input
POWER	Power indicator
ERROR	Error indicator
SD CARD	SD card slot
TTL signal(245/spi signal)	RS485 signal
CLK	Clock signal	B	Signal A / DMX+
DAT	Data signal	A	Signal B / DMX-
GND	Signal ground	GND	Signal ground
NOTE: For the TTL(SPI) signal, the controller signal ground must connect to the LED ground directly.

Welcome to contact with us for more information