Complaint
Product introduction
13X APG molecular sieve is specially designed to co-absorb CO2 and H2O for air cryo-separation industry. It has larger capacity and faster adsorption speed for removal of CO2 and H2O to prevent the bed gelation, it is suitable for any air cryo-separation plants of any size and any types in the world.
Technical Specification
Model | 13X APG | |||
Color | Light gray | |||
Nominal pore diameter | 10 angstroms | |||
Shape | Sphere | Pellet | ||
Diameter (mm) | 1.7-2.5 (8*12mesh) | 3.0-5.0 (4*8mesh) | 1.6(1/16inch) | 3.2 (1/8inch) |
Size ratio up to grade (%) | ≥98 | ≥98 | ≥98 | ≥98 |
Bulk density (g/ml) | ≥0.67 | ≥0.65 | ≥0.63 | ≥0.62 |
Wear ratio (%) | ≤0.20 | ≤0.20 | ≤0.40 | ≤0.40 |
Crushing strength (N) | ≥25/piece | ≥75/piece | ≥25/piece | ≥60/piece |
Static H2O adsorption (%) | ≥27 | ≥27 | ≥27 | ≥27 |
Static CO2 adsorption (%) | ≥18 | ≥18 | ≥18 | ≥18 |
Water content (%) | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 |
Typical Chemical Formula | Na2O . Al2O3 . 2.45SIO2 . 6.0H2O (SiO2 : Al2O3 ≈2.6-3.0) | |||
Typical Application | Removal of H2O from air fro air cryo-separation application | |||
Regeneration:
molecular sieve13X APG can be regenerated by either heating in the case of thermal swing processes; or by
lowering the pressure in the case of pressure swing processes.
To remove moisture from a 13X APG molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptans or CO2levels below 2ppm.
The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
