Description
Curtis Speed PMC 1207B-4102 24V 250A DC Series Motor Controller For Forklift StackerProduct Description
Specifications:
- Nominal input voltage: 24 V
- PWM operating frequency: 15 kHz
- Electrical isolation to heatsink (min.): 500 VAC
- KSI input voltage: 16 - 30 V
- KSI input current (typical):
- 80 mA without programmer
- 130 mA with programmer
- Logic input current (typical): 10 mA at 24 V
- Logic input threshold: 8 V
- Ambient operating temperature range: -25°C to 50°C
- Heatsink overtemperature cutback: 85°C
- Heatsink undertemperature cutback: -25°C
- Package: splash resistant
1207B-4102 is the upgraded version of 1207/1207A DC Series Motor Controllers. 1207B-4102 is fully compatible with the old 1207/1207A controllers, ideal for replacing 1207A-41xx controller (for example 1207A-4107).
The 1207B controller accepts a variety of throttle inputs, through various combinations of its four throttle input pins. Throttle types:
- Type 1 = 5kΩ-0
- Type 2 = 0-5V, 3-wire pot, and electronic throttles
- Type 3 = 0-5kΩ throttles
For better applying the controller to your system, we may reprogram the controller after your requirement. If you need to modify any controller parameter, please send us a message with the list of parameters to be modified.Overview:
CURTIS PMC 1207B programmable motor speed controllers are the latest upgraded version of popular 1207A controllers. The CURTIS 1207B programmable motor speed controller provides efficient, cost-effective, and simple-to-install control for a variety of small electric vehicles. Typical applications include walkie fork/pallet trucks, mini personnel carriers, and sweepers. The microprocessor-based logic section combined with a proven MOSFET power section gives the 1207B controller high power and advanced features in a simple, compact package.
Key Features:
- CURTIS Model: 1207B-4102
- Norminal Battery Voltage (Volts): 24V
- Maximum operating voltage: 30 V
- Overvoltage point: 33 V
- Minimum operating voltage: 16 V (= undervoltage point)
- Contactor voltage: 24 V
- Contactor current (maximum): 1 amp (current limit at 2 amps)
- Contactor coil spike protection: internal diode to brake; internal diode from brake to KSI
- Shunt driver current (maximum): 2 amps
- Shunt driver spike protection: active clamp at 47 V
- 1 Minute Current Rating (amps): 250
- 2 Minute Current Rating (amps): 200
- 5 Minute Current Rating (amps): 150
- 1 Hour Current Rating (amps): 100
- Throttle Type: 0-5K Ω (default setting), 5K-0 Ω or 0-5V
- Dimensions: L122xW165xH66 mm
- Net Weight: 1.1 kg
Features Include:
- Power MOSFET design, providing
- infinitely variable drive and plug brake control
- silent high-frequency operation
- high efficiency (for reduced motor and battery losses)
- Compact size
- Overvoltage and undervoltage protection
- Thermal protection and compensation circuitry provides undertemperature cutback, constant current limit, and linear rollback in overtemperature - thus preventing sudden power loss regardless of thermal conditions
- CURTIS 1313-4331 Handheld Programmer (optional) provides a full set of parameter and function settings, as does the CURTIS 1314 PC Programming Station (optional)
- Diagnostic and test information for the controller - and other system components - readily available both on-board and through the programmer
- On-board potentiometers allow direct manual adjustment of acceleration rate, creep speed, maximum speed, plug current, and main current limit (1207 single-mode models only)
- Circuitry and software detects faults in the throttle circuit, MOSFET drive circuit, MOSFET transistors, contactor drivers, and contactors - ensuring that the controller meets EEC fault detect requirements
- Input sequencing options include neutral start and static return to off (SRO)
- Microprocessor-controlled contactor sequencing provides true arcless contactor switching
- Smooth, controlled plug braking - with either variable (throttle-dependent) or fixed plug current limit
- Neutral braking option provides automatic plug braking in neutral
- MultiMode™ input selects between two different operating modes, thus allowing optimization of vehicle characteristics for different driving conditions
- Emergency reverse (belly button switch) with a single input Ramp-start feature provides full power for starting on ramps
- Simple contactor and switch wiring, with coil drivers monitored for faults - thus ensuring fail-safe operation
- Flexible throttle circuitry accommodates a variety of throttle types
- Programmable "ramp shape" (static throttle map) provides flexibility in selecting throttle response feel
- Connections made by solid copper power busses with a polarized Molex connector for control signals
- Solid, well-protected construction - with an aluminum mounting plate and injection-molded cover.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Samples arrived often need 3-5 days.
Q3. Do you have any MOQ (minimum order quality)limit?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: We often ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping is also optional.
Q5. How to proceed an order?
A: Initially, let us know your requirements or application. Besides, We quote according to your requirements or our suggestions. Thirdly, customers confirms the samples and places deposit for formal order. Finally, We arrange the production.
Q6. Is it acceptable to print my logo on the product?
A: Yes. Please inform us formally before our product and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer one-year warranty for our products.
Q8: How to deal with the flaw?
A: Our products are produced in strict quality control system and the percent of pass is often maintained over 99.8%.
Our Company
Hefei Huanxin Technology Development Co., Ltd. has been devoting ourselves to developing and manufacturing and other since 2004. We are located in Hefei, Anhui Province, with convenient transportation access. We employ over 101 - 200 People staff members. We have achieved great improvement since our company was founded in 2004. We abide by the motto of First-class quality,Reasonable price, Best service and Professional product support.
On Exhibition
Package and Shipping
Package:Normally we use the standard exporting parcel. We also can package the item according to clients' request .
Shipping :
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai/Guangzhou/Ningbo sea port .