Complaint
CDM6065/6065E is equipped with a low noise, low emission, small size, and strong power Yanmar engine. It is also equipped with a new type of independent flow distribution hydraulic system (LUDV) unrelated to the load pressure. The machine owns characteristics of energy saving, full functional, good stability, high productivity, spacious and comfortable cabin etc.
CDM6065/6065E is widely used for municipal engineering, garden project, irrigation and water conservancy construction etc.
Yanmar TNV series engine
Yanmar four-cylinder, four-stroke, water-cooled, direct injection engine. It's powerful and fuel-efficient. Using the unique CAE technology of Yanmar, large muffler, and a new type of cooling fan, effectively reduces the noise and vibration of the machine. And optional with the engine conforming to Euro IIIA emission standard.
Specifications:
| Specifications | CDM6065 | |
| Engine | Model | Yanmar 4TNV94L (Stage II) |
| Rated power | 43.3 kW(58.8 hp) /2400 rpm | |
| Bore × Stroke | 94 mm×110 mm | |
| Displacement | 3.054 L | |
| Min. Fuel Consumption | 220 g/kw.h | |
| Operating weight | Summary | Operating weight:6050kg The operating weight includes the weight of 3000mm standard boom, 1550mm standard arm, 0.25m3 standard bucket, 400mm track shoes, lubricating oil, coolant, the full diesel oil tank and the rest standard configuration units. |
| Ground pressure | 32 kPa | |
| Fluid capacity | Fuel tank | 134 L |
| Cooling system | 15 L | |
| Engine oil | 10.5 L | |
| Swing drive unit | 1.2 L | |
| Traveling gear | 2×1 L | |
| Hydraulic oil tank | 115 L | |
| Swing motor | Summary | Plunger Type (with safety valve and closed type brake) |
| Swing speed | 11 rpm | |
| Travel motor | Summary | Plunger Type (with safety valve and closed type brake) |
| Taveling speed | 2.5 -5.0 km/h | |
| Gradeability | 35°(70%) | |
| Maximum Traction | 58.3 kN | |
| Traveling mechanism | Standard track shoe width | 400 mm |
| No. of track shoe | 39 (each side) | |
| No. of carrier rollers | 1 (each side) | |
| No. of track rollers | 5 (each side) | |
| Hydraulic system | Main pump | Axial variable plunger pump |
| Max. flow of system | 146 L/min | |
| Max. pressure of equipment | 24.5 MPa | |
| Max. pilot pressure | 3.7 MPa | |
| Operating equipment | Each machine action is under the pilot control. The right lever controls the motion of boom and bucket while the left lever controls the arm motion and upper structure swing. The foot pilot valve is provided with the lever joystick to control the machine traveling or turning by the foot or lever. The traveling gear shift adopts the solenoid switch control. | |
| Electrical system | System voltage: 24 V | |
| Battery: 12 V, 85 A | ||
Transport Size
The following sizes approximate to that of the equipment of standard configuration.
