Custom Medical Grade Free Breathing Design Full Face Diving Mask

Min.Order: 100

Product origin: Xiamen, Fujian, China

Infringement complaint:

Complaint

US$ 0.1

Description

Custom Medical Plastic/Silicone/Rubber Oxygen Mask Seal Cushion For Manual Resuscitator/CPAP/SCBA

Silicone and rubber oxygen masks are heavier than plastic masks. They are designed to provide a good seal for long-duration use by aviators, medical research subjects, and hyperbaric chamber and other patients who require administration of pure oxygen, such as carbon monoxide poisoning and decompression sickness victims. Dr. Arthur H. Bulbulian pioneered the first modern viable oxygen mask, worn by World War II pilots and used by hospitals.^[1] Valves inside these tight-fitting masks control the flow of gases into and out of the masks, so that rebreathing of exhaled gas is minimised.

Application:
The Silicone Mask Seal Cushion is designed to provide protection for rescuer when manually resuscitating patients, using with automatic ventilators and manual resuscitators.

Medical plastic oxygen masks

Medical plastic oxygen masks are used primarily by medical care providers for oxygen therapy because they are disposable and so reduce cleaning costs and infection risks. Mask design can determine accuracy of oxygen delivered with many various medical situations requiring treatment with oxygen. Oxygen is naturally occurring in room air at 21% and higher percentages are often essential in medical treatment. Oxygen in these higher percentages is classified as a drug with too much oxygen being potentially harmful to a patient's health, resulting in oxygen dependence over time, and in extreme circumstances patient blindness. For these reasons oxygen therapy is closely monitored. Masks are light in weight and attached using an elasticated headband or ear loops. They are transparent for allowing the face to be visible for patient assessment by healthcare providers, and reducing a sensation of claustrophobia experienced by some patients when wearing an oxygen mask. The vast majority of patients having an operation will at some stage wear an oxygen mask; they may alternatively wear a nasal cannula but oxygen delivered in this way is less accurate and restricted in concentration.

Silicone and rubber masks

Silicone and rubber oxygen masks are heavier than plastic masks. They are designed to provide a good seal for long-duration use by aviators, medical research subjects, and hyperbaric chamber and other patients who require administration of pure oxygen, such as carbon monoxide poisoning and decompression sickness victims. Dr. Arthur H. Bulbulian pioneered the first modern viable oxygen mask, worn by World War II pilots and used by hospitals.^[1] Valves inside these tight-fitting masks control the flow of gases into and out of the masks, so that rebreathing of exhaled gas is minimised.

Hoses and tubing and oxygen regulators

Hoses or tubing connect an oxygen mask to the oxygen supply. Hoses are larger in diameter than tubing and can allow greater oxygen flow. When a hose is used it may have a ribbed or corrugated design to allow bending of the hose while preventing twisting and cutting off the oxygen flow. The quantity of oxygen delivered from the storage tank to the oxygen mask is controlled by a valve called a regulator. Some types of oxygen masks have a breathing bag made of plastic or rubber attached to the mask or oxygen supply hose to store a supply of oxygen to allow deep breathing without waste of oxygen with use of simple fixed flow regulators.

Oxygen masks for aviators

Applied Case

Aviation passenger masks and emergency oxygen systems

Self-contained breathing apparatus (SCBA)

Specialized masks for astronauts

Specialized masks for pets

Oxygen delivery to divers

Anesthesia oxygen masks

Masks for high-altitude climbers

Oxygen helmets

Mask retention systems

Description:
1)They come with a transparent dome for visual check of bleeding, vomitus and spontaneous breathing, and a thumb rest for a tight, easy seal.
2)They eliminate the need for cleaning, disinfecting and sterilising.
3)They can be autoclaved repeatedly at 134°C.
4)Available more than 10 different sizes.
5)100% latex free.

Our Advantage:
1.Precision Mold-Making Technology (Since 1998)
2.Competitive Price: Origin Manufacturer.
3.Five experienced designers: offer technology/production/design/artwork support etc.
4.Production and Test strictly according to ISO9001.
5.Complete Production Plant, Equipment, Environment

Forward

Related products