Description
ET-165 MCU Accelerator 0-5v In Control Handle
Description:CURTIS ET-165 MCU throttle assemblies provide an analog 0-5V output proportional to throttle position for interfacing with CURTIS PMC motor speed controllers. Used as electric forklift part, golf cart part and electric mobility vehicle part, ET-165 MCU provides also forward / reverse signals for motor controllers or vehicle control units.
This new MCU version replaces the old ET-165 throttle. They are functionally identical, but the MCU version has a microprocessor, providing more accurate speed signal output.
The CURTIS ET-165 MCU throttle is the same product as CURTIS ET-126 MCU, with different connector.
Specifications:
- Input voltage (volt): 24-48V DC
- Signal output: 0-5V
- Maximum throttle output: 5.3V
- Minimum throttle output: 0V
- Maximum deadband at zero throttle: 10 degrees
- Maximum deadband at full throttle: 10 degrees
- Forward/Reverse current: 1.5A max
- Symmetrical throttle response in both directions
Key Features:
- Model: ET-165 MCU
- Hall effect sensors and solid state MOSFET contactor drivers minimize moving parts, thereby increasing reliability and Mean Time Between Failure.
- Symmetrical throttle response in both forward and reverse directions ensures smooth, concise acceleration and deceleration in both directions.
- Minimal deadband areas at both zero and full throttle positions eliminates hesitation when beginning to accelerate or decelerate.
- Environmental protection of major components through an epoxy layer over the circuit board assures operation in harsh environmental conditions.
- Wig-wag type throttle returns the throttle to neutral for convenience and safety.
- Input polarity protection to ensure no damage occurs to the throttle if it is incorrectly wired.
- Easy to install.
Our Company:
Customers Feedback:
Related Products:
Packing & Delivery
Package:Normally we use the standard exporting packaging. We also can according to clients' request .
1. By Couriers: DHL, UPS, FEDEX, TNT are the main courier companies we are cooperating.
2. By Air: Delivery from the Shanghai airport to customer's destination city air port.
3. By Sea: Delivery from the Shanghai sea port .
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality.
Q2. What about the lead time?
A: Sample needs 3-5 days.
Q3. Do you have any MOQ limit?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.
Q8: How to deal with the faulty?
A: Our products are produced in strict quality control system and the defective rate will be less than 0.2%
Complaint
