High Sensitivity Universal RF Transmitter and Receiver 433MHz

Specifications

Usage:
The remote controller can be made with different decode and frequency and channels as your request. They are widely used in garage door remote controller, rolling door remote controller, sliding gate, remote controller electric vehicle alarm remote controller, motorcycle alarm remote controller, ceiling fan remote controller etc.

Technical parameters:
Memory code: 100 codes
Decode: EV1527 or HCS301
Monostable mode and biastable mode: You can choose mode you like when you learning code with remote control
Channel: 1.2.3.4 channel as your request
Receiver moule: Superheterodyne receiver moule
Output: +12V output. -12Voutput. Dry connect output

A. Feature
1. You can choose bistable (continuous ouput) or monostable( momentary output) directly when learning code with remote control.
2. The receiver is use-friend. We can produce them with different code remote control as your request .the receiver is widely used as motorcycle alarm receiver, electric vehicle alarm receiver, sliding gate receiver, auto gate receiver, sliding door receiver, rolling door receiver, ceiling fan receiver  etc.

B. Function
LED
Green LED for power indication
Red LED for learning code indication

Learning code
S1 for learning button of Monostable
S2 for learning button of Bistable

Learning code with Monostable:
1st relay: Press S1 1 time, red LED light (about 1second) to flash 1 time to light ( receive the signal from remote control).

2nd relay: Press S1 1 time, red LED light (about 1second) to flash 2 times to light ( receive the signal from remote control).

3rd relay: Press S1 1 time, red LED light (about 1second) to flash 3 times to light ( receive the signal from remote control).

4th relay: Press S1 1 time, red LED light (about 1second) to flash 4 times to light ( receive the signal from remote control). Now keep the remote control and receiver close, press any button of the remote control, the red LED will off and relay close if have learnt the code from remote control successfully, if remote control not receive the signal in 5s, the red LED is off automatically which exit learning code mode

Learning code with Bistable:
1st relay: Press S2 1 time, red LED light (about 1second) to flash 1 time to light ( receive the signal from remote control).

2nd relay: Press S2 1 time, red LED light (about 1second) to flash 2 times to light ( receive the signal from remote control).

3rd relay: Press S2 1 time, red LED light (about 1second) to flash 3 times to light ( receive the signal from remote control).

4th relay: Press S2 1 time, red LED light (about 1second) to flash 4 times to light ( receive the signal from remote control). Now keep the remote control and receiver close, press any button of the remote control, the red LED will off and relay close if have learnt the code from remote control successfully, if remote control not receive the signal in 5s, the red LED is off automatically which exit learning code mode
(3): Remove code: Long press S1 or S2 for 5s, when the red LED flash then turn off, which means remove the code successfully

Note: If remove the code careless, the unit system can't resume it.




Packaging & Shipping

1.What frequency do you need?

433.92 Mhz or 315 Mhz
 

2.What encode do you need?

rolling code : HCS301, HCS300, HCS200 etc.

learning code: PT2240, EV1527 etc.

fixed code :SC2260 , SC2262, etc.
 

3. How can i pay for products?

 Payment: T/T ,Paypal ,Western Union.
 

4. Do your products carry warranty?

Yes, 6 month or more and permanent service.
 

5. How do i purchase more than 1 remote?

 Please contact with me,we offer samples to test before ordering.