High Performance Eco Friendly China Machine Spare Part Coil Winding Tungsten Carbide Nozzle

Min.Order: 20
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 5 ~ 10

Description
High Performance Eco Friendly China Machine Spare Part Coil Winding Tungsten Carbide Nozzle


Product description

Coil winding wire guide Nozzles(TungstenCarbide nozzle)also call wire guide tubes, wire guide eyelets, wire guide needles.

 

it is used on coil winding machine. It is made precisely of hard alloy and enjoys the hardness up to HRA90.

 

Two terminals and innerle are all receive mirror surface treatment to ensure enameled wire makes no scrape. High hardness, resistance to flexure, block and impact. 



Product Features:

1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing. Hardness Value: 1800 ~ 2200Vickers, or 3times that of case hardened steel. Body material is stainless steel for structural supports, not wear-bearing.

2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.

4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.


Prodict Specification:
Measurements:
Customize available by requested, outside diameter is governed by nozzle wall thickness. See the measurements drawing to confirm your nozzles measurements according to your winding machine and coil products.

Processing limit: D1≥ 0.2mm, D1≥ 0.7mm
NOModelLL1DD1dd1H
1W0220-0.8-06022020.80.60.20.2 
2W0530-1.5-10073071.510.50.5 
3W0530-2-1007307210.50.5 
4W0535-2-1210351021.20.50.5 
5W0435-2-1007357210.40.4 
6W0330-2-080830820.80.30.3 
8W0326-2-1007267210.30.3 
9W0530-2-10103010210.50.5 
11W835-2.5-201135112.520.80.8 
12W0330-2-1006306210.30.3 
13W0635-2-1215351521.20.60.6 
15W0530-3-10103010310.50.5 
16W0630-3-1008308310.60.6 
17W03303-080730730.80.30.3 
19W0630-3-130930931.30.60.6 
21W0614-3-1509p14931.50.60.65
22W1014-3-1509p14931.5115
23W0414-3-1009p149310.40.45
24W1030-330 3 11 
25W0326-3-080826830.80.30.3 
29W0626-3-120826831.20.60.6 
30W1030-3-20143014321212 
31W1230-3-2514301432.51.21.2 
33W0330-3-050230230.50.30.3 
34W0626-3-120826831.20.60.6 
36W0330-3-050430430.50.30.3 
37W0823-325 3 0.80.8 
38W0435-1211351131.20.40.4 
39W03535-3-0811351130.80.350.35 
41W1025-3-160825831.611 
42W0845-3-20174517320.80.8 
43W1535-335 3 1.51.5 
44W1036-3-201636163211 
45W0630-3-1212301231.20.60.6 
46W0830-4-20153015420.80.8 
47W1243-4-2515p431542.51.21.220
48W0843-4-2015p3215420.80.820
49W1232-4.543 4.5 1.21.2 
50W1543-4-2512p431242.51.51.520
51W0843-3.9-2019p20193.920.80.819
52W2020-520 5 22 

Display of Product










 

Information of our company

HARTAI Technology Industry Co., Ltd , found in 2001, is located in the beautiful city of China's manufacturing industry Dongguan City.  It is committed to nozzle, ruby products, tungsten carbide products, ceramic products, plastic crochet hook and precision machinery manufacturing .Our main products are nozzle, ceramic roller, jump wire preventer, various sizes of ceramic eyes, combination  wire roller, ceramic wheel and non-standard parts, all kinds of tension and so on. 


 







FAQ

1. How can I get a quotation?


You can find our contact information below this page and some detail information will be very helpful to get an exact quotation. We will give quotation within 24hours, if urgent, please tell us and we will regard your inquiry priority.
 
2. How can I get a sample?

 
As the price confirmed, you can require for samples. 
 
3. Can you do the design for us?
 

 Yes, we have our factory and we can make OEM order.
 
 
4. How long can I expect to get the sample?
 
Normally it takes 7-15days to produce the sample.
 
 
5. What about the lead time for mass production?
 

It depends on what kind of products you ordered. Generally, 15-25days for mass order.
 
We sincerely hope to get your inquiry of this voice coil actuator! If any questions, please feel free to contact us.  Thanks for visiting our website!O(∩_∩)O









Scroll to Top