A3 Size Drawer Type High Pressure Heat Transfer Heat Press Machine for Sublimation Printing (38X45cm)

Drawer type high pressure heat press machine 38x45cm for wholesale

This machine can transfer the pictures into such kind of cloth as cotton, fiber, chemical fiber and other such things. It can also do the heating such as to print the silk and web, rubber paste and foam.Furthermore, it can copy the colored pictures, photos, and sight patterns to the porcelain plate and other metal plates. This machine can produce more pressure and the heating plate can be moved by about 90 degrees because of the special designing, which makes us more comfortable and safer to operate. It is especially great for making common xylopyrography, American xylopyrography, singlet and others products, economically and practically.

Detailed Images

               Spring.                                                                                                                Wiring                                                                           Screw for regulating pressure.
Using the flexible spring, good              Safety wiring in line with European standards.                                                 Clockwise is to increase  the pressure,
quality and durable.                                                                                                                                            anti clockwise is to reduce the pressure                                                                                                                                                                                                                                         

Simple maintenance tips.

1. Pressure: If the pressure is not good enough or it is too hard, use the adjusting rode, and clockwise means more pressure, otherwise less pressure.
2. Time: When the time is up, the warning doesn't work or ring forever, we should check whether the switch in the box at the end of the machine is all right, if not, please adjusting it to the right place.
3. Temperature: preheating for about 15 minutes. When the temperature reaches the right level, the heating indicator light turns off, we can begin our work. When the power is on, the plate doesn't heat, and then check the circuit.
4. When pressing the rod to the bottom, leave it alone for rising again. Adjust the screw nut at the heating plate, when finishing, if it is hard to raise the rod, please adjust the screw. 

Payment