Main power | AC220V 50HZ/DC24V/DC12V/3.3V battery power supply | |
Power consumption | <15W (Supporting power consumption with sensors ) | |
Display and buttons | Display in Chinese and English, can display instantaneous flow, accumulated flow and alarm display (excitation open circuit alarm, empty pipe alarm, flow over limit alarm). Four membrane touch switches for data setting | |
Counter | Forward total, reverse total | |
Output signal | Analog output | Two-way, fully isolated 0~10mA/4~20mA |
Load resistance: 0~1.5kΩ when 0~10mA; 0~750Ω when 4~20mA | ||
Frequency output | Forward and reverse flow output, the upper limit of output frequency can be set within 1~5000Hz. Open collector bidirectional output of transistor with photoelectric isolation. The external power supply is not greater than 35V, and the maximum current of the collector when it is turned on is 50mA | |
Alarm Output | Two-way open collector alarm output with photoelectric isolation transistor. The external power supply is not greater than 35V, and the maximum current of the collector when it is turned on is 250mA. Alarm status: fluid empty pipe, excitation disconnection, flow overrun | |
Pulse output | Forward and reverse flow output, the output pulse upper limit can reach 5000CP/S. Pulse equivalent is 0.0001~1.0m³/P. The pulse width is automatically set to 20ms or square wave. Open collector output of transistor with photoelectric isolation. The external power supply is not greater than 35V, and the maximum current of the collector when conducting is 50mA | |
Matching accuracy | 0.5% | |
Damping time constant | Continuous variable from 0~100s (90%) time grading optional | |
Communication | Optional RS232C or RS485 serial communication interface, HART communication protocol | |
Loss of power | The internal design of the instrument has a power-off clock, which can store 16 power-off records (10 years) (need to be customized) | |
Protection class | IP65(standard);IP68 can be customized for the split type(only for transmitter). | |
Diameter | DN10-DN3200mm | |
Explosion-proof mark | Ex d ia [ia Ga] q IIC T6 Gb | |
Ambient temp | -10°C~60°C | |
Flow range | 0.3~15m/s |
You will benifit from our electromagnetic water flow meter:
1.Saving money
Measuring precision,long lifetime
2. Low cost
The cost is lower than the other models out there contact us
3. Less maintenance
No moving parts, maintenance-free
4.Widely used
Wide range of norminal diameters DN10mm to DN3200mm .
Every fluids with entrained solids can be metered ,eg, slurry or cellulose pulp
Q:What kind of products do you offer ?
A:We supply pressure sensor, level sensor, flow meter and digital controllers. Main market is European countries, American, the Middle East and Asia. Certificates are international ones.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO, Europe standard ATEX, TUV-CE and ROSH,we could send the certification test of our company to you.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us and we will try our best to satisfy you.
Q:Could I visit your factory?
A:Of course,if you need we will help you to visit our factory.
Q: How can I get the quotation or send my inquiry to?
A: Send your inquiry to us by the inquiry from on the right-side or the bottom of this page.