Complaint
Torque speed sensor:
ZJ-AF flange torque speed sensor input and output end use flange connection(one side must be rigid connection). Because this model sensors without the use of the bearing, can effectively avoid measurement errors caused by bearing heating. Suitable for high speed rotating or requiring short axial occasion.
| Model | Range | H | H1 | D1 | D2 | n-d1xdepth | L1 | L2 | L3 | L4 | L5 | L6 | d2 | h |
| ZJ-5/10/20/50AF | 5/10/20/50 | 185 | 100 | 52 | 66 | 6-M6X10 | 2 | 2 | 115 | 135 | 45 | 80 | 7 | 12 |
| ZJ-100AF | 100 | 185 | 100 | 52 | 66 | 6-M6X10 | 2 | 2 | 115 | 135 | 45 | 80 | 7 | 12 |
| ZJ-200AF | 200 | 195 | 105 | 52 | 66 | 6-M8X12 | 3 | 3 | 125 | 150 | 60 | 90 | 7 | 12 |
| ZJ-500AF | 500 | 205 | 105 | 55 | 70 | 8-M8X12 | 3 | 3 | 130 | 160 | 60 | 90 | 9 | 15 |
| ZJ-1000AF | 1000 | 213 | 105 | 60 | 80 | 8-M10X16 | 5 | 5 | 160 | 200 | 70 | 100 | 11 | 15 |
| ZJ-2000AF | 2000 | 213 | 105 | 60 | 80 | 8-M10X16 | 5 | 5 | 160 | 200 | 70 | 100 | 11 | 15 |
| ZJ-5000AF | 5000 | 286 | 150 | 80 | 136 | 8-M16X25 | 5 | 5 | 210 | 250 | 80 | 120 | 17 | 20 |
ZJ torque speed sensor (dynamic) adopts strain gauge measurement technique.The electrical signal of elastic shaft under torsion can be measured by providing power for the strain gauge bridge. After amplified,and voltage/frequency conversion, the strain signal is converted into the frequency signal directly proportional to torsional strain. Product features: 1. Torque measurement;energy and signal non-contact transmission; output signal digitized . 2. High testing precision, high stability and anti-inter ference ability. 3.Repeating zero setting is not required continuous 4. Both static torque and dynamic torque can be measured. 5.an be used independently without secondary instrument, output signal can directly use by PLC or PC . 6.Can be customized according to customer requirements. Main Function and Performance Index: Torque indication error: <± 0.2 % F · S Sensitivity: 1±0.2 mv / V Nonlinear: ≤±0.2 % F·S Repeatability: ≤±0.2% F·S Lag: ≤0.2 % F·S Zero drift (24 hours) : ≤0.1 % F·S Output impedance: 1KΩ ±3Ω Insulation resistance: >500MΩ Static overload: 150 % Breaking load: 200 % Power supply voltage:DC±15V±5% ,DC 24V( optional) Speed output signal: 60-2000 pulse / turn(optional) Zero torque frequency output:10KHZ Positive torque full scale frequency output :15KHZ Reverse torque full scale frequency output :5KHZ Signal duty ratio: (50±10)% Power consumption of the sensor: 4W Temperature when use: -20 ~ 70ºC Relative humidity: ≤90%RH |
Main application:
FAQ:
CONTACT US:
