Float Switch for tank liquid level control
Breif introduction:
1.Muti-point control for long-distance;Adopt mercury switch as the contact parts.
2.Good effect for anti-corrosive function.
3.New design elliptical body and CCC certificate normal high - quality rubber or PVCmaterial cable; Use plastic injection and one type molding.
4.Can make sure the long term, safety and stable usage.
Main features:
1. Good design and strict produce techniques.
2. Adopt new design elliptical body, high mechanical strength and good sealing.
3. Cable adopt special material, it have high oil,acid, alkali, corrosion resistance.
4. The ON or OFF switch control signal is very reliable and stable without any error movement.
5.Easy to install, convenient to debug, fast fluctuation shift, random to select the control range
Float switch Technical Specification:
Rated voltage | 250V(380V)/120V |
Rated current | 16A(8A),10A(8)A,10(4)A |
Working temperature | 0ºC-65ºC |
Accuracy | ±0.05m |
Working pressure | 1atm |
Medium | rinsing,sewage,oil |
Power life | 1×100000 times |
Machine life | 5×1000000 times |
Cable length | standard 3m, 4m, 5m, 10m (can be customized in other length) |
Float switch series:
Certificate:
Exhibition:
FAQ
1.Simple construction,reliable performance of cable float switch/water pump, tank float switch
The product can output stable and reliable switch control signal of "of making", breaking "without any fault action,so its eliability is very high and antiinter-ference is strong .
2. Sturdy and durable,need not maintain of cable float switch/water pump, tank float switch
The product can be used for a long time after it being installed.Almostno maintence and repairing problem would occur during its operation period.
3. Easy installation method,convenient adjustment method
The liquid level control scope can be adjusted at will with the locating piece moving up and down .Only one screw is needed to secure the signal cable finish installation.
4. Wide application scope,strong generality
The product applies to branch water,sewage acid-base solution of less than medium concentration,oils and situations requiring no pollution(for example food and drinks indusry),diesel oil gasification kitchen range,and automatic fuel feeding.
5. Simple circuit.economial and practical
Operation voltage is 200V,and current can be up to 10A.The applied circuit of the product is simple,so application costis very low .
6. Instructions for installation
May be used for direct level control.In accordance with product electrical specifications.In the case of approved products,the ground wire will always be included and the ground wire sheath will always be yellow/green.In this case ,this two remaining wires are suppied for "high closure"or,specifitic request,"low closure".
7. Installation of counterwelght
Use wires:"Black" and "Blue" with these contacts, the regulator closes when down/opens when up.The wire that is not used must be correctly insulated.