Description
N06625/Haynes 625 plate We can cut the length and width
1.Product Description We are professional Inconel 625,UNS N06625,UNS No6625,Alloy 625,Inconel Alloy 625,inconel625,alloy625 material factory from china
We could supply inconel 625 material in the forms of Forging parts,Forged Rings,Rolled Rings,forged shafts, hollow bars,tube sheets, forged discs,forged sleeves,round Bars,rods,flanges, Casting Parts,Pipe Fittings,elbows, reducer, tee, seamless pipe,Weled Pipes,tubings,gaskets,Plates,Sheets,Strips,Coils Wires,spring ,Fasteners,Machining Parts, and so on
Inconel 625 is a nickel-chromium-molybdenum alloy with an addition of niobium that acts with the molybdenum to stiffen the alloy's matrix and thereby provide high strength without a strengthening heat treatment. The alloy resists a wide range of severely corrosive environments and is especially resistant to pitting and crevice corrosion.
inconel 625 Typical application field as below:
1 .The Organic chemical process parts contains chloride, especially in the use of acid chloride catalyst.
2. The digester and bleacherin the use of paper pulp and paper making industry.
3.Absorption tower, re-heater,gas import board, fan, blender, fair water fin, flue and so on for using in flue gas desulfurization system.
4. The equipment and parts in the use of acidic gas environments.
5. Acetic acid and anhydride reaction generator
6. Sulfur acid cooling
We own one workshop of more than 8000 square meters, with a vacuum melting, electroslag remelting, forging, heat treatment, machining, quality inspecting machines and a full-line of production system
We will do following inspections for our inconel 625 material:Charpy Impact Testing,Tensile Testing,Chemical Analysis,Metallurgical Evaluation,Failure Analysis,Hardness Testing,Macrostructure Testing,Stress Rupture Testing as per the needs of the clients
Welcome the inquiry
| Limiting Chemical Composition of inconel 625 (%) | |
| Nickel | 58.0 min. | Silicon | 0.50 max. |
| Chromium | 20.0-23.0 | Phosphorus | 0.015 max. |
| Iron | 5.0 max. | Sulfur | 0.015 max. |
| Molybdenum | 8.0-10.0 | Aluminum | 0.40 max. |
| Niobium (plus Tantalum) | 3.15-4.15 | Titanium | 0.40 max. |
| Carbon | 0.10 max. | Cobalt | 1.0 max. |
| Manganese | 0.50 max. | | |
Finishings of Ba En 1.4565 S34565 Stainless Steel Plates
| No.03 | Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.
| Kitchen utensils,Building, construction
|
| No.04 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.
| Kitchen utensils, Building construction,
Medical equipment.
|
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
| Building Construction.
|
| Mirror No.08 | Shinning like a mirror
| Builiding Construction |
characteristics of Ba En 1.4565 S34565 Stainless Steel Plates
| 2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses. |
| No.1 | Polished with abrasive belt of grit#100-#200, have better brightness with discontinuous coarse stria, used as inner and external ornaments for building, electrical appliances and kitchen utensils etc |
| No.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarse stria, but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
| HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators, door of building, frontal plate etc. |
| BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror, kitchen apparatus, ornament etc. |
| 8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
Maintenance of Ba En 1.4565 S34565 Stainless Steel Plates
(1) Regular cleaning and maintenance
(2) Pay attention to prevent the occurrence of the phenomenon of surface scratches
(3) Use soap, weak detergent or warm water to remove surface dust, dirt
(4) In addition to the surface of the binder with alcohol or an organic solvent (ether, benzene)
(5) Use neutral detergent or ammonia solution in addition to surface oil
(6) With 10% nitric acid or abrasive detergent in addition to the surface of the embroider caused by the dirt.
FAQQ: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material don't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can you provide a sample for our testing before confirm the order?
A: Yes. We can provide sample to you for approval before you place an order to us. Free sample is available if we have stock.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up.
4. Contact usName: Denny Cheng
Direct line: 021-67897611
Tel: +86 18605565290
Address: 518,XINZHUAN ROAD, SONGJIANG DISTRICT, SHANGHAI, CHINA 201612
Web: shanghaibozhong.en.made-in-china.com
Complaint
