Description
Free-standing double-membrane Gas holder,
In 3/4 spherical shape, installed on the ground
Main structural features:
- Bottom membrane. For sealing of the complete gas storage system;Inner membrane. For partition of biogas and air and pressure regulation;Outer membrane. For biogas output under constant-pressure and protection for inner membrane;Electrical control cabinet. For making constant pressure in the room between Inner and outer membrane;Safety protector. For air release when pressure is too high in the room between the inner and outer membrane;Explosion-proof blower. For air pumping;Anchoring device. Including press plate, anchor bolts, etc.;Support device. Including middle bar, support network, seat belts, etc.;Detecting device. Including mirrors, sensors, etc .;
The membrane quality and production process determines the quality and life-time of the entire gas holder. We can provide Germany-made, Belgium-made membrane, or Mainland-made, Taiwan-made membrane, to meet the following features:
- Anti-aging;Strong tensile strength;Anti-corrosion for sulfide etc;Anti-ultraviolet;Alkalinity Resistance;Good softness;Compound tight, good air tightness.
Parameters Table for Selection
| Volume V (m3) | Dia.meter D (m) | Height H (m) |
| 100 | 6.7 | 5.4 |
| 200 | 8.3 | 6.6 |
| 300 | 9.4 | 7.4 |
| 500 | 11.0 | 8.6 |
| 750 | 12.5 | 9.8 |
| 1,000 | 12.9 | 10.2 |
| 1,500 | 14.8 | 11.6 |
| 2,000 | 16.4 | 12.8 |
| 2,500 | 17.6 | 13.7 |
| 3,000 | 18.8 | 14.5 |
Comments:
The above are standard dimensions,subject to actual requirements and bigger sized gas holders are available too.
Complaint
