Description
Product DetailsProduct Name | Industrial Water Tube Boiler Single Drum low pressure Steam Turbine Generator |
Type of output | DC/AC Three Phase/AC Single Phase |
Generator type | DC Generator/ Synchronous Generator |
Power | 100KW-2000KW |
A complete set of steam turbine island comprises of following equipments and sub-systems:
1.Turbine-generator set ---power is generated through the action of generator driven by the turbine connected to it.
2.Water-condensation system
--steam is condensed to water to be circulated to boiler and heated again.
3.Vacuum system
A.sub-system of main steam (where steam circulates to propel the blades of turbine
)
B.water cycle system (where water circulates from condenser to be heated again
)
C.DCS system (monitors the operation of turbine and adjusts output rate
)
D. deaerating &water supplying system (where oxygen is removed to ensure good operation environment and water is supplied
)
4. Cooling Air system (for air-cooled unit only)
5. Generator system ( electricity is generated in this system)
Our protocol of delivering power plant construction project is as follow: 1.The Argumentation of Project
2. Engineering Design
a. Turbo-Gen Set and its auxiliary systems
b.Layout of Condensed Water System
c.Layout of Heat System
d.Civil Construction and Structure of Turbo-Gen Set
3.Equipment Purchase
a.Turbo Generator Set and its auxiliary systems
b.Condensed Water System
c.Vacuum System
d.Lower Temperature Heating System
4. Civil Construction
a.Foundation and the upper structure of the Turbo Generator House
b.Foundation of Turbo-Gen Set and its auxiliary systems
c.Foundation of other structures
5. Operation & Maintenance
a.Operation of power plant (technical counseling)
b.Regular maintenance and inspection
c.Technical Training Program for power plant personnel
d.General Overhaul
6. Installation & Testing
a.Installation & testing for all systems & equipment provided
b.Installation, testing & trail run of all systems of a power plant (Optional)
c.Installation, testing & trail run of entire power plant (Optional)
7. Supply of Spare Parts
Reference List No. | Item | Project detail |
01 | Commissioner | LafargeHolcim | Century Paper Mill | Polat | SPGCL |
02 | Location | Gombe State, Nigeria | Lahore, Pakistan | Turkey | India |
03 | Scope of service | EPC project | Engineering, Purchase, Supervision of construction | EPC project | EPC project |
04 | Application | service power plant of a cement factory | service power station of a paper mill | independent power plant | independent power plant |
05 | Model | air-cooled condensing turbine island | condensing/extracting turbine | condensing turbine | reheat turbine |
06 | Brand | Simons | HTP | HTP | HTC |
07 | Standard of engineering | DIN. | GB | GB | GB |
08 | Layout | single-story layout with horizontal steam discharge | downward steam discharge | downward steam discharge | downward steam discharge |
09 | Technical parameters | presure of steam inlet:8.5MP tem. of steam inlet: 435C. rated power:16.5MW back pressure:15KPa | presure of steam inlet:4.9MP tem. of steam inlet: 475C. rated power:18MW pressure of extraction:1.1MP flow of extracted steam:54.6Mpa back pressure:15KPa | presure of steam inlet:8.83MP tem. of steam inlet: 435C. rated power:51MW back pressure:4.9KPa | presure of steam inlet:16.7MP tem. of steam inlet: 538C. rated power:300MW pressure of extraction:1.1MP back pressure:10KPa |
10 | Performance (under standard condition) | heat rate:2467kcal/kw steam rate:4.16kg/kw | heat rate:2206.5kcal/kw | heat rate:2215.3kcal/kw steam rate:4.16kg/kw | steam rate:3.64kg/kw |
We produce high quality DC motor
1. Model-YRKK560-8
2. AC Slipping
3. 415V
4. 900KW
5. 750-RPM
6. 50Hz
7. Cooling IC611
8. Protection:IP54 (Total Enclosed)
9. Mounting:IMB3
10. Frame:560MM
11. Duty:SI
12. SKF Bearingdust removal equipment water bath dedusting equipment
Features of electric furnace dust removal system:1) Dust removal system equipment has strong reliability, not affecting the normal operation of smelting, easy for maintenance.
2) Gas flue capture mode belongs to the whole process of capturing.
3) Gas flue capture rate is more than 98 percent, can achieve plant roof, can not see smoke
4) Dust collection efficiency is more than 99 percent
5) Dust concentration in the workshop is less than 10mg/m3.
6) Low cost for long-term operating , stable efficiency
7) The wind engine noise is less than 80dB.
8) The flue has no dust fouling phenomenon
9) Dust collecting volume is more than 12Kg / t steel
Induction furnace is used for smelting or insulating ferrous metals, non-ferrous metals, sponge iron, such as scrap iron, scrap steel, copper, aluminum and so on. Complete working equipment such as continuous casting machine, rolling mill, mainly used for the production of billet, steel bar, angle steel, H-beam, I-beam, etc. Using KGPS, IGBT, single or double power supply technology, PLC (Siemens) can be realized throughout the monitoring.
Main supply list: 2 sets of electric furnace body, 2 sets of hydraulic or mechanical tilting electric furnace mechanism, 1 set of control platform, 1 set of intermediate frequency control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), low voltage control cabinet (6 pulse 1, 12 pulse 2, 24 pulse 4), 1 set of capacitor cabinet, 4 or 8 water-cooled cables; 1 water temperature alarm, 1 leakage alarm; 1 crucible mold, 1 liquid One batch of pressure steel pipe, one set of copper row, three water tanks. Transformer, cooling tower, furnace builder, furnace lining ejector, furnace cover.
Product Model: GW1.5-IGBT-1300-0.5-B
Dual output with a set of power supply, can supply power to two sets of furnaces simultaneously, to achieve "one for two", total power can realize stepless free distribution on two sets of furnaces. Equipping two sets of furnaces, one is used for melting or heating refining , the other is used for insulation and casting, and two sets of furnaces can mutual replace to use. Medium frequency power supply device of IGBT transistor module can be used for melting, induction heating, heating treatment.
Main Technical Parameters
No. | Item | Technical Parameters |
01 | Furnace rated capacity (steel) | 1.5t |
02 | Rated power of medium frequency power supply (1000+300) | 1300kW |
03 | Maximum power of single furnace output | 1000kW |
04 | Rated frequency | 500Hz |
05 | Working temperature | 1600ºC |
06 | Melting rate(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting) | 1.6t/h |
07 | Power consumption(Rated loading material, concentrate, density, the third furnace, auxiliary time not counting) | 600kWh/t |
08 | Cooling water consumption- medium frequency power supply cabinet | 30m3/h |
Supply Range of Complete Set
No. | Item | Unit |
01 | IGBT-1300(1000+300)-0.5-B medium frequency power supply device of transistor module | 1set |
02 | "Medium frequency power supply cabinet using closed cycle water cooling device"(Set in the rectifier cabinet) | 1set |
03 | Air conditioning refrigeration equipment (Set in frequency power supply device) | 4 sets |
04 | GW1.5t Melting Furnace | 2 sets |
05 | Hydraulic actuator(including hydraulic pump station, console, hydraulic oil tubing) | 1set |
06 | Water-cooled cable | 8sets |
07 | Cooling water dispenser(used for inductor and water-cooled cable) | 2 sets |
IGBT Dual track working GW1.5-IGBT-1300-0.5-B
IGBT technology b GW3-IGBT-2000-0.2-Bfurnace with cover GW1-IGBT-800-1-B
KGP-7t-5000-dualWe provide PS steel chip crusher 2018PS series steel chip crusher, used to crush all kinds of car scraps, shavings and cuttings into 20-50mm scraps, in order to enter the chip and machine (metal chip briquetting machine) for briquetting treatment.
[Features]
1 Hydraulic system is adopted to effectively solve the overload protection problem;
2 Hydraulic motor, high torque, saving power;
3 PLC control.
Version:0.9 StartHTML:0000000105 EndHTML:0000011308 StartFragment:0000000141 EndFragment:0000011268
List of 450 heavy scrap crusher
Serial
number Name Specifications
(mm) Qty Remarks
1 Crusher shell 50mm 1 set Q235, plate thickness 50mm
2 Host hammer High manganese
steel 1 set 16 pieces, each hammer
head 80kg
3 Circular cutter High manganese
steel 1 set 16 pieces, 45kg for each
round cutter
4 Rotor disc φ1100 1 set Outer wear electrode welding
5 Spindle Diameter 390mm 1 root
6 Sieve plate φ65×100 1 set Steel casting ZG45
7 Motor 220KW 2 sets
8 Starting cabinet Soft start 1 set Control equipment operation
9 Hydraulic pumping station Matching 1 set
Unpacking cylinder, movable
plate cylinder,
Forced feed cylinder
10 Dust removal system Matching 1 set Cyclone dedusting,
pulse dedusting
11 Feeding machine 1 set
12 Magnetic separator 1 set
13 Loader heavy conveyor 1400×12000 1 set
14 Discharge belt conveyor 1000×10000 1 set
15 Belt conveyor 1000×8000 1 set
16 Waste belt conveyor 800×6000 1 set
1.Product principle and Application
The crushing production line uses the principle of hammering. Under the drive of a high-speedand high-torque motor, the hammers on the host rotor take turns to hit the objects to be crushed in
the cavity. Through the space formed between the liner and the hammers, After the crushed object
is torn into a crushed object conforming to the specifications, a high-quality crushed material with
high purity can be obtained under the action of a magnetic device.
This production line is used to process waste car body, tinplate, household appliances,
bicycles, empty cans and other lower scraps to make it into a superior steel making raw material.
The machine continuously crushes, removes the coating film, increases the specific gravity of the
volume, prevents the electric furnace from exploding, and improves the water output rate under
certain conditions.
2.Technical conditions
1.1 (1) Ambient temperature: -20 ºC -40 ºC
(2) Production staff: 3-5 people
(3) Installation method: According to the installation diagram, the technicians guide the
installation
1.2 Power supply
(1) Three-phase four-wire 380V AC (±10%), 50HZ (±2%)
(2) Low-voltage power supply of the equipment: 380v / 50hz;
Working lighting power: 220v / 50hz;
3.Processing object
1. Waste car body (excluding engine, reduction gear box, tire, etc.);
The 450KW crushing line needs to be broken into squares not larger than 800mm * 800mm
when crushing colored steel tiles.
2, Tinplate (cans, etc.)
3. Iron sheet for home appliances (excluding motors, compressors, shafts, etc.)
4. ≤6mm light and thin materials and similar domestic waste
25, Empty cans (wash out thin materials, coatings, etc.), non-sealed cans.
Note: After all the processed materials have been preliminarily processed, the shape and
volume need to ensure that they can smoothly enter the main machine inlet. (Such as cans, small
paint buckets, color steel tiles, car shells, etc.)
4.Not suitable for broken objects
1 Dangerous things:
a Sealed container, conduit, etc .;
b. Items that may cause an outbreak, fire, etc .;
2 Scrap cars:
a. Subjects other than passenger cars;
b. Engine, converter, differential gear, tire;