Laptop Type C USB Input LED Reading Light

Laptop e-Reading Lamp Usage Instruction

Package:
Please contact us if any lost or damage when received package.
• 1pcs laptop lamp   • 1pcs Flannel bag   • 1pcs USB-Type C cable   • 1pcs USB-Type C adapter   • Instruction


The product icon shown here is indicative only. If there is inconsistency between the image and the actual product, the actual product model shall govern.
Tips:
• Please only use the USB cable attached (5V DC,1A), Otherwise it won't work properly and even cause a fire.
• Do not hanging any objects on the lamp, in avoid to case damage.
• Do not touch metal parts while working, beware of burning hands.
• Please keep cables safety and do not puncture.
• Please remove cable from USB port if long time no use.
• Please contact us for help if below situation and remove USB from port immediately.
- When the lamp case or wire is damaged,or wire is exposed.
- When cable is burning or smells an unpleasant smell.
- When lamp is flickering abnormally while working.
• Do not used in outdoor or wet location in case of Short circuits and accidents. Only for indoor dry location use.
• Disassembling lamp will make warranty invalidate and may cause accidents,it's forbidden.
How To Install:

1. As shown in(Figure 1), pull lamp by hands with max distance 10mm. Request Laptop screen thickness between 3-10mm.
2. Install lamp on frame of screen(Figure 2).Kindly notice there is no gap between clip and screen.
3. Type C plug into lamp,USB to laptop USB port(Figure 3). If your laptop only have Type C port, please use USB to Type C adapter.

     


• Please do not use Non-original cables or extend cables, it may cause lamp works abnormally.
• Recommend laptop USB port as power supply.
• If power bank or adapter as power supply, please make sure output voltage 5V, current above 1A.
• Please remove the lamp according to the reverse process of installation. Pay attention to only take plastic parts in case of burning as heating after long time working (Figure 1).

Usage Instruction:




Maintenance and Troubleshooting
• Firstly turn off the lamp,and then remove the USB from laptop.Use a soft, lint-free cloth moistened with a little diluted neutral detergent to wipe the lamp body. Do not use alcohol or any other kinds of chemical solvents, such as kerosene, scouring oil etc.In case of damage lamp.
• Do not wash lamp or any accessories.
• If the lamp does not work, please make sure the USB cable connects correctly.
DATASHEET
Model:AT-LTL01
Voltage: DC5V,1A
Max Power:3W
Size:L 143* W44 * H24mm
Net weight:61g
Package size:176*68*42mm