Astmd 4329 Exposure of Plastic Fluorescent Ultraviolet (UV) Lamp Units Artificial Light Ultraviolet Aging Test Chamber

Min.Order: 1
Product origin: Dongguan, Guangdong, China
Infringement complaint: complaintComplaint
US$ 6000 ~ 10000

Description
Product Description

ASTMD 4329 Exposure of Plastic Fluorescent Ultraviolet (UV) Lamp Units artificial light ultraviolet aging test chamber

ASTMD 4329 Exposure of Plastic Fluorescent Ultraviolet (UV) Lamp Units artificial light ultraviolet aging test chamber uses fluorescent ultraviolet lamps as light sources, and conducts accelerated weather resistance tests on materials by simulating ultraviolet radiation and condensation in natural sunlight to obtain the results of material weather resistance. It can simulate environmental conditions such as ultraviolet light, rain, high temperature, high humidity, condensation, darkness, etc. in natural climates. By reproducing these conditions, they can be combined into a cycle, and it can be automatically executed to complete the number of cycles.
 
Detailed Photos

 
Product application

Widely used in coatings, inks, paints, resins, plastics, rubber, printing and packaging, aluminum profiles, adhesives, automobiles, motorcycle industries, cosmetics, metals, electronics, electroplating, medicine, etc.

Product Parameters

 

ModelYUV-263
Test area size W×H×D(cm)117Wx50Hx45D 
Exterior chamber size W×H×D(cm)160Wx145Hx75D
performanceTemp.rangeRT+10ºC~70ºC
Humi.range75%RH~95%RH
Rain time1~99999mins,adjustable
Rain period1~240mins,interval adjustable
Light modelUV-A(295~360nm),UV-B(280~315nm)optional
UVA/UVB light power40W(lifetime 1800h)
Irradiance1.0W/m2 adjustable
Standard specimen size75×150mm or 75×300mm
Control accuracy±0.1ºC,±1%RH
SystemTemp.controllerImported LED digital display PID+SSR microcomputer integrator
SensorPerkin resistance PT100Ω/MV
Time controllerImported programmable time controller
Heating systemNichrome heater
Condensation humidification systemStainless steel humidifier
Blackboard tempMetal blackboard thermometer
Water supply systemAuto water filling system
Circulating systemQuiet motor,multi-vane centrifugal fan
MaterialExterior chamber materialStainless steel
Inner chamber materialSUS#304 stainless steel
Sample holder materialSUS#304 stainless steel
Standard configurationStandard sample holder 24pcs,light tubes 8pcs(UVA/UVB)
Safety ProtectionLeakage,short circuit,over temp.,water shortage,over current protection
Power supplyAC 1ψ220V 60/50Hz
Operation condition5ºC~+30ºC≤85%RH
Customization serviceNon-standard or special requirements are all welcome
 
Product features

1. Black aluminum plate is used to connect the temperature sensor, and the blackboard temperature meter is used to control the heating, and the temperature is more stable.

2. The amount of radiation is measured by a high-precision display and measurement of a dedicated ultraviolet radiation meter.
3. Irradiance is not more than 50 W/m2.
4. Illumination and condensation can be independently controlled and alternate cysle control.
5. The independent control time for illumination and condensation and the time for alternate cycle control can be set arbitrarily within 1000 hours.

 
Company Profile

 







Certifications

 

After Sales Service

1. Free parts for 12 months.

2. One year warranty, during in this year, we provide free maintenance. Beyong the warranty, we provide accessories with low cost, lifetime maintenance service is available.

Welcome to send your test requst to our email, we will reply you asap, thank you. 
Product Tag:
Related categories:
Scroll to Top