Description
Description of Stainless Steel Wire Mesh
Stainless steel wire materials in SUS302, 304, 316, 304L, 316L.
Typical Weaving Patterns for Stainless Steel Wire Mesh: Plain weave, twill weave, Dutch weave.
Usually in 30m ( up to 200) long and in width of 1m 1.2m 1.5m 2.0metc. Or cut to strip or punched into disc as clients requirement
We also can make supper width 2.0M to 6.0M , which usually used on paper-making mesh.
Mesh Weaving Type:
1. [ Plain Weave ]: also called tabby weave, linen weav or taffeta weave, is the most basic type of weaves.
In plain weave, the warp and weft are aligned so they form a simple criss-cross pattern.
Each weft thread crosses the warp threads by going over one, then under the next, and so on.
The next weft thread goes under the warp threads that its neighbor went over, and vice versa.
2. [ Twill Weave ]: In a twill weave, each weft or filling yarn floats across the warp yarns in a progression of interlaces to the right or left,
forming a distinct diagonal line. This diagonal line is also known as a wale.
A float is the portion of a yarn that crosses over two or more yarns from the opposite direction.
3. [ Plain Dutch Weave ]: similar with plain weave, just the weft and warp wire have different wire diameter and different mesh size.
4. [Twill Dutch Weave ]: similar with twill weave, just the weft and warp wire have different wire diameter and different mesh size.
5. [ Reversed Dutch Weave ]: difference from standard Dutch weave lies in the thicker warp wires and less weft wires.
1.Plain Weave and Twill Weave Stainless Steel Wire Mesh Reference Specification: | Specification list of plain Woven Wire mesh |
| Meshes Per Linear Inch | Diameter of Wire | Width of Opening | Open
Area, % |
| Inches | mm | Inches | mm |
| 10 x 10 | 0.047 | 1.2 | 0.053 | 1.34 | 28.1 |
| 10 x 10 | 0.035 | 0.9 | 0.065 | 1.65 | 42.3 |
| 10 x 10 | 0.032 | 0.8 | 0.068 | 1.27 | 46.2 |
| 10 x 10 | 0.025 | 0.63 | 0.075 | 1.90 | 56.3 |
| 12 x 12 | 0.041 | 1.0 | 0.042 | 1.06 | 25.4 |
| 12 x 12 | 0.035 | 0.9 | 0.048 | 1.22 | 33.2 |
| 12 x 12 | 0.032 | 0.8 | 0.051 | 1.29 | 37.5 |
| 12 x 12 | 0.028 | 0.7 | 0.055 | 1.39 | 43.6 |
| 12 x 12 | 0.023 | 0.58 | 0.060 | 1.52 | 51.8 |
| 14 x 14 | 0.032 | 0.8 | 0.039 | 1.52 | 29.8 |
| 14 x 14 | 0.025 | 0.63 | 0.046 | 0.99 | 41.5 |
| 14 x 14 | 0.023 | 0.58 | 0.048 | 1.22 | 45.2 |
| 14 x 14 | 0.020 | 0.5 | 0.051 | 1.30 | 51.0 |
| 16 x 16 | 0.028 | 0.7 | 0.035 | 0.89 | 30.5 |
| 16 x 16 | 0.023 | 0.58 | 0.040 | 1.01 | 39.9 |
| 16 x 16 | 0.018 | 0.45 | 0.045 | 1.14 | 50.7 |
| 18 x 18 | 0.020 | 0.5 | 0.036 | 0.91 | 41.1 |
| 18 x 18 | 0.018 | 0.45 | 0.038 | 0.96 | 48.3 |
| 20 x 20 | 0.023 | 0.58 | 0.027 | 0.68 | 29.2 |
| 20 x 20 | 0.020 | 0.5 | 0.030 | 0.76 | 36.0 |
| 20 x 20 | 0.018 | 0.45 | 0.032 | 0.81 | 41.0 |
| 20 x 20 | 0.016 | 0.40 | 0.034 | 0.86 | 46.2 |
| 24 x 24 | 0.014 | 0.35 | 0.028 | 0.71 | 44.2 |
| 28 x 28 | 0.010 | 0.25 | 0.026 | 0.66 | 51.8 |
| 30 x 30 | 0.013 | 0.33 | 0.020 | 0.50 | 37.1 |
| 30 x 30 | 0.012 | 0.30 | 0.021 | 0.53 | 40.8 |
| 35 x 35 | 0.012 | 0.30 | 0.017' | 0.43 | 33.8 |
| 35 x 35 | 0.010 | 0.25 | 0.019 | 0.48 | 42.4 |
| 40 x 40 | 0.014 | 0.35 | 0.011 | 0.28 | 19.3 |
| 40 x 40 | 0.012 | 0.30 | 0.013 | 0.33 | 27.4 |
| 40 x 40 | 0.010 | 0.25 | 0.015 | 0.38 | 36.0 |
| 40 x 40 | 0.0095 | 0.24 | 0.016 | 0.40 | 38.4 |
| 50 x 50 | 0.009 | 0.23 | 0.011 | 0.28 | 30.3 |
| 60 x 60 | 0.0075 | 0.19 | 0.009 | 0.22 | 30.5 |
| 70 x 70 | 0.0065 | 0.17 | 0.008 | 0.20 | 29.8 |
| 80 x 80 | 0.0070 | 0.18 | 0.006 | 0.15 | 19.4 |
| 80 x 80 | 0.0055 | 0.14 | 0.007 | 0.17 | 31.4 |
| 90 x 90 | 0.0055 | 0.14 | 0.006 | 0.15 | 25.4 |
| 100 x 100 | 0.0045 | 0.11 | 0.006 | 0.15 | 30.3 |
| 120 x 120 | 0.0040 | 0.10 | 0.0043 | 0.11 | 26.6 |
| 120 x 120 | 0.0037 | 0.09 | 0.005 | 0.12 | 30.7 |
| 150 x 150 | 0.0026 | 0.066 | 0.0041 | 0.10 | 37.4 |
| 165 x 165 | 0.0019 | 0.048 | 0.0041 | 0.10 | 44.0 |
| 180 x 180 | 0.0023 | 0.058 | 0.0032 | 0.08 | 33.5 |
| 180 x 180 | 0.0020 | 0.050 | 0.0035 | 0.09 | 41.1 |
| 200 x 200 | 0.0020 | 0.050 | 0.003 | 0.076 | 36.0 |
| 200 x 200 | 0.0016 | 0.040 | 0.0035 | 0.089 | 46.0 |
| 220 x 220 | 0.0019 | 0.048 | 0.0026 | 0.066 | 33.0 |
| 230 x 230 | 0.0014 | 0.035 | 0.0028 | 0.071 | 46.0 |
| 250 x 250 | 0.0016 | 0.040 | 0.0024 | 0.061 | 36.0 |
| 270 x 270 | 0.0014 | 0.040 | 0.0022 | 0.055 | 38.0 |
| 300 x 300 | 0.0012 | 0.030 | 0.0021 | 0.053 | 40.1 |
| 325 x 325 | 0.0014 | 0.040 | 0.0017 | 0.043 | 30.0 |
| 325 x 325 | 0.0011 | 0.028 | 0.0020 | 0.050 | 42.0 |
| 400 x 400 | 0.0010 | 0.025 | 0.0015 | 0.038 | 36.0 |
| 500 x 500 | 0.0010 | 0.025 | 0.0011 | 0.028 | 25.0 |
| 635 x 635 | 0.0009 | 0.022 | 0.0006 | 0.015 | 14.5 |
2.twill weave stainless steel wire mesh:
3.Dutch Weaving Stainless Steel Wire Mesh Reference Specification:
dutch weaving stainless steel speicification: | mesh | wire dia (MM) | Material (AISI) |
| 12 X 64 | 0.58/0.40 | 304 316 |
| 24 X 110 | 0.36/0.25 | 30.316 |
| 14 X88 | 0.50/0.33 | 30.316 |
| 30 X150 | 0.18/0.14 | 30.316 |
| 40 X200 | 0.14/0.11 | 30.316 |
| 50 X250 | 0.10/0.071 | 30.316 |
| 80 X700 | 0.06/0.05 | 30.316 |
| 165 X800 | 0.071/0.040 | 30.316 |
| 165 X1400 | 0.05/0.032 | 30.316 |
| 200 X1800 | 0.05/0.03 | 30.316 |
| 325 X2300 | 0.030/0.025 | 316L |
| 400 X2800 | 0.030/0.02 | 316L |
4.stainless steel wire mesh production processing
4.Packing and Delivery:
5. how to calculate the hole size or the mesh size?
usually the mesh No are how many rolls per inch,
for example, 6meshX6mesh,
means there are 6 holes in one inch.
some time to show hole size in aperture such as 3.2mm aperture,
also means about 6 mesh.
the exact aperture is different due to the different wire diameter
7. mesh test :8.big stock , which can send goods immediatly.we have big stock of the usual size stainless steel wire mesh,
the usual size of plain weave, twill weave, dutch weaving wire mesh,
from the coarse to fine mesh, please give me your detail requirement,
if your size just in our stock, we can send to you immediately.
if in stock, the min quantity can be one roll.
other relative special material of woven wire mesh fo high temperature filtering:
relative other woven wire mesh
Services Provided:
Free sample servicesWe offer samples,with sample costs,shipping and taxes paid by the buyer.
Customize servicesWe can produce many kinds of welded mesh products,if you have your own design or have specificationdrawing,we can make products as your requirement.
If you don't have any idea, please tell us where will it be using, we will give you some specification to refer,and we can provide the drawing also.
After-Sales ServicesOur after-sales service start immediately after signing the contract.
1.No matter FOB or CIF the price term is we would try our best to find a lowest freight cost for customers' reference.
2.We will send production process photos to customers for their inspection.
3.Do our best to help customer arrange the shipment and customs clearance.
4.Installation, maintenance and repair instructions with full information.
Complaint
