Xz1350 Trenchless Horizontal Directional Drill Rig Machine HDD Drill Machine

Product Model: XZ1350 Horizontal Directional Drill
XZ1350 HDD structure adopts crawl chassis, it uses the power saving closed hydraulic system, equipped with electro-hydraulic proportion control, efficient advanced load sensitivity and patent technical. The main technical specifications reach the advanced level in international. The main components of hydraulic system, transmission, electric system and gearbox are made of world first-class brand products, good performance, good reliability.
1. Features Introduction of XZ1350 HDD
1.1 Numerical meter display the working torque, push or pull force and so on parametric in working conditions. Electronic sensor has rapid reaction and can show overload immediately. It also endures accuracy and delay of the traditional hydraulic meter's indication. It solve the matter to depend the operator to calculate the torque and force by the equipment's switch directive.
1.2 Elastic equilibrium release technology is to avoid device damaging when pulling pipeline back, which increase the reliability.
1.3 The HDD adopt the patent of rotation tooth. It is easy to achieve in clipping the pipe. It is reliable in clamping.
1.4 The HDD's rotation adopt closed hydraulic system and it's push or pull adopt load sensitivity technology. The main part of hydraulic and electric and transmission are made of world first-class brand products, good performance, good reliability.
1.5 Cab's 45°rotation enhances comfortable operation.

2. Technology Introduction
2.1 Chassis
HDD adopts crawl chassis. It can fitted to more kind of ground and has high reliability. The travel gearbox producing by world first-class brand make it possible of good performance, good reliability.

Distance between wheel's axis	3165 mm
Width between two tracks outside	2475 mm
Width of track	450 mm
Length between two tracks	2025 mm
Number of track rolle	7×2
Gearbox of travelling	88ml/r /47ml/r
Drive force	72kN ×2
Gradient	30°
Max travelling speed	2.2km/h
Ground pressure	80kPa
Weight	25t

2.2 The powerful engine has the turbine torque increment characteristic. It meets for the
request of Chian Stage II and EU Stage A.

Model of engine	QSL8.9-C360
Rated power	264kW
Max torque of engine	1500N·m /(1500r/min)
Rated speed of engine	2100 r/min
Emission of engine	China Stage III and EU Stage A
Capacity of fuel	425L

2.3 Hydraulic System
Rotation adopts the closed hydraulic system. The movements of push or pull adopt load sensitivity technology. World first-class brand's components can provide good performance and good reliability.

Rotation system
Pump	H1P-147 ×1
Pressure	350bar
Motor	A6VM107 ×2
Gear Box
Push or pull system
Pump	ERR100×1
Pressure	350bar
Motor	A6VM107 ×4
Gear Box
Capacity of Hydraulic oil tank	490L
Hydraulic oil	Caltex HD46(-15ºC~40ºC) Caltex HDZ46(-30ºC~40ºC)

2.4 Electronic system
The HDD adopts intelligent and CAN bus control technology. The meter shows clearly and easy to see.
The HDD shows the actual torque and push or pull force immediacy in the large and high showing size monitor automatic.
PLC control technology can detect the engine speed, the temperature of cooling water, the pressure of lubrication, the temperature of hydraulic oil, the pressure or stoppage of filter element, the position of carriage etc. It can also alarm to the operator in wrong condition.
The HDD travel safety at stepless speed regulation and controlled by wire cable.
The multi-speed control of rotation and push or pull make HDD be suitable to the complex geology.

Voltage of electronic	DC24V
Battery	6-QW-120B ×2
Controller	Rexroth   RC28
Monitor	MURPHY   7
Handle of rotation	P+G
Switch of sensor	Honeywell
Switch of route	Honeywell
Sensor of temperature	Danfoss
Sensor of pressure	Danfoss

The entry angel is changed by adopting the link weldment and cylinder. It has the advantage of simple and safety. Entry angle adjust by drill frame 10°~17° 
2.6 Carriage
Push or pull is executed by rack and pinion. The HDD also use the floating axis to protect
the pipe's thread. The rapid speed is carried out by the variable motor. The speed of carriage
and the force of push or pull can be executed steplessly.

Push/pull force	1795kN
Max thrust-pull speed	27m/min
Maximum rotating torque	50500 N·m
Spindle speed	89r/min
Distance of carriage moving	7500mm
Gearbox of rotation	2
Gearbox of push or pull	4

2.7 Clamp
The HDD is fitted with the clamp so that the pipe can be gripped tightly. The fixed wise and rotation wise can separate or integrate. It has a good sight of clamp and is good to change the tooth.

Torque of clamp	110000N·m
Rotation angle	25°
Distance of clamp separation	300mm

2.8 Loader Crane
The HDD is assembled 3.2t loader crane. It was controlled by hand and It operate vey convenience.  

Weight of lift	3.2t
Max distance of lift	8.1m
Max torque of crane	6.4t·m

2.9 Cab
Cab with anti-noise function and air condition can rotate by cylinder. It is also fitted with light, windscreen wiper, sunshade curtain, damping seat and suit for operation. All these increase comfortable while operating the HDD.

Width of cab	1000mm
Length of cab	1800mm
Air conditioning and refrigeration capacity	4600W
Air conditioning heating capacity	5000W(Engine coolant above 85ºC)

2.10 Pipe and tools (optional)
Petrol pipe and No-dig pipe is available. water wing backreamer, expander backreamer, compact fluted backreamer or the others special tools is available. The diameter isΦ300mm to Φ1000 mm, the max distance which can deal with is 1000m. The customer should determine what kind of tools, joint, swivel will be used depend on the geology at the operation site.

Parameter	Specification one	Specification two
Diameter of pipe	φ114mm	φ127mm
Length of pipe	6000mm	6000mm
Joint of pipe	API NC46	API NC50

Note. The force and torque on the pipe can't reach to max at the same time. Please to obey the rules of the pipe. This can avoid the thread cement of the pipe.

3.Main technical parameters

	Item	Parameter
Engine	Manufacturers	Cummi.ns
	Model	QSL8.9-C360
	Power rating	264 kW/(2100 r/min)
	Max pull/thrust force	1795 kN
	Max pull/thrust speed	27m/min
Rotation	Maximum torque	50500 N·m
	Max spindle speed	89 r/min
Pipe	Diameter×Length	φ114mm×6m
		φ127mm×6m
Max inclination angle		17°
Loader Crane	Lifting weight	3.2 t
	Loading capacity	6.4 t•m
Travel driving	Style	Steel crawler self-propelled
	Traveling speed	2.2 km/h
Weight		25t
Dimension	L×W×H	11680×2760×3540

4. Core parts subsidiary

Core parts	Matching manufacturer
Engine	Cum.mins
Rotary pump	Sauer
Push pump	Sauer
Rotary Motor
Rotary reducer
Push Motor
Push reducer
Controller	Rexroth
Main valve	AMCA
Handle	P+G
Walking reducer
Hydraulic cylinders
Lorry crane
Hydraulic tubing

5. The Machine Appearance and Transportation

The machine transportation Dimension	11680×2760×3540mm
Shiping weight(free of Drill and Drilling Tools)	25t

6. Accompanied Attached Documents
HDD machine start when accompanied by the packing list, include the following technical documents:
Product certificate
Product Manual
Engine Specification
Air Conditioning of Construction Vehicle General Manual
Operation and Maintenance Manual of Loader Crane
Mud Pump Instruction Manual
Packing List (including wearing parts and spare parts inventory, vehicle tools inventory, shipping list with items)