Atlas Copco Air Compressor Lubricating Oil

ETR company is the leader of integrated medical gas and engineering solutions in China and our solutions and products have been used for more than 20 countries of the world. In China market, ETR has served for more than 7000 hospitals of 32 provinces with full coverage. it is also UN qualified supplier.

We also supply different brands of air compressor/oxygen booster/pipeline filter original spare parts with good price and good service. Any solutions and original spare parts requirement please contact us freely.

Product description:
Atlas screw air compressor oil has 12000 hours, 8000 hours, 4000 hours and other special oils, mainly according to the site conditions and production needs, according to different use time, the difference in additives in the oil .

Product features:
1. Excellent thermal oxidation stability to prevent deterioration of lubricating oil at high temperature
2. Good material adaptability to avoid leakage during system use;
3. Excellent heat transfer performance, reducing compressor operating temperature;
4. Excellent resistance to high temperature coking and anti-carbon deposition, enhancing the safety of the
   compressor at high temperatures;
5. Excellent high and low temperature performance to ensure normal operation within a wide temperature range
   of the system;
6. Good lubricity, protect the compressor and reduce wear;
7. Excellent overall performance

Product advantages:
1. High temperature resistance
2. Good lubrication performance
3. Low volatility
4. High viscosity
5. Good anti-corrosion performance

Note:
1. Good on-site operating environment
2. Regularly replace the three filters and oil products
3. Need to use special Atlas screw oil
4. Avoid using Atlas special oil mixed with other brands of screw oil
5. Regularly purge the air filter to ensure that foreign impurities contaminate the oil.

Common problems:
1. Using unqualified engine oil
At present, the general-purpose screw air compressor has high temperature protection, and its usual tripping temperature is about 110-120 °C. Some machines use unqualified oil, and when the exhaust temperature is high, different degrees of fuel consumption will occur. Phenomenon (based on this, the higher the temperature, the greater the fuel consumption), the reason is that some oil droplets can be of the same order of magnitude as the gas phase molecules after the primary separation of the oil and gas barrel at high temperature, the molecular diameter is ≤0.01μm, the oil is difficult to be Its capture separation results in excessive fuel consumption.
Solution: Find the cause of high temperature, solve the problem and lower the temperature, and use good quality oil as much as possible.

Lubricant replacement elements:
1. Air compressor oils of different brands and different grades are forbidden to be mixed.
2. The old engine oil needs to be drained when replacing. It is strictly forbidden to use supplemental or filtration
   and reuse. Because although the surface looks like the color of the air compressor oil, the consumption of
   additives may have exceeded the limit.
3. If there is not much oil in the engine oil, put 1/2 new oil, run it for 15 to 60 minutes, and then fill it with new oil. If
   there is too much carbon in the air compressor, after removing the cylinder, manually remove the sludge and    
   carbon deposit, and then use special cleaning agent to clean, but after cleaning, dry it with dry air, then add    
   cleaning oil to clean 100 After 200 hours, the cleaning oil was drained and the new oil was added for normal
   operation. Failure to do so may not only destroy the performance of the oil additive, but may also result in a
   safety incident.
4. When replacing the oil, you should also change the oil bypass filter (air filter), oil filter, oil separator, filter filter
   element, etc., check whether the air filter, check valve, temperature control alarm, etc. are in good condition. 

The advantages of the original parts:
1. Longer service life. Regular maintenance of your equipment with original spare parts ensures a long life of your
   unit. We guarantee that each new component has the same good performance as the replaced component.
2. High quality Our original parts are manufactured to the same exacting standards as the compressors you have
   installed. These parts have passed the durability test and proved to be your investment guarantee.
3. Reliability and Productivity: The use of original parts can radically reduce the risk of downtime, as
   discontinuation is not only costly, but can also affect product quality, delivery time and profitability. In short, the
   original parts will give your compressed air unit better performance.
4. Energy Savings and Cost Effectiveness Regular replacement and use of Atlas Copco original parts will result in
   a longer service life of your compressed air unit and a lower average pressure drop for energy savings and
   cost effectiveness. Provides greater displacement at a lower cost of ownership.





COMPANY OVERVIEW

1.Basic Information about ETR


workshop



2. Company Fair



Certifications
Our products are passed CE/ISO/SGS certitifaction to make sure all of our products are qualified to the markets.


Welcome to contact ETR for medical  gas solution,ETR got expertise team to support you.