spray type pre-treatment system | dip coating type pre-treatment system |
The pre-treatment system is design for the workpiece surface treatment because there has oil,rust or other kinds of dust which will influence the powder coating effect. It mainly includes the shot blasting,spraying,immersion and sand blasting ways.Different kinds of workpieces can be used different kinds ways. |
inner working picture | outside picture of powder coating system |
Powder coating system includes the coating booth, recycle system,powder coating reciprocator,and control system. The booth has three kinds of material:cold-rolled sheet, stainless steel and PP.which can be chosen by yourselves. The recycle system has three kinds including filter recycle,multipipe cyclone and mono-cyclone system,our recycle system working rate over 95%. The control system is european brand Electrical switches and control unit. |
Drying system | powder curing system |
The oven system have two functions including the drying system which is used for drying after the pretreatment(because the pretreatment need the watering which makes the workpiece surface is wet). Another way is used for heating the workpiece which needs the powder dip coating way. What's more,the oven can be used for powder curing when the temperature reaches 180-250ºC, the powder will stick to the workpiece surface to meet your need. |