Complaint
Statement
To help to protect your benefit and enjoy good after-sale customer service.Please verify if the store is "Dongguan Hongtuo Instrument Co.,Ltd".Also please verify our band "DahoMeter "and "Quarrz".We are the only manufacturer of these products in China.Recently we found out some shops in MadeInChina just copied our products completely.We have never authorized any other shops to sell our products.
We ONLY offer the after-sale customer service to the customers who purchase the machines from our factory DIRECTLY.
Application
It is suitable for the field of quality management,cost control,new formula
researching,new materials researching, scientific academies, researching key laboratories,quality inspection.dye,bleach,leather,glaze,clay suspension.,etc industrial.
Standards
According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc.
DE-120T can measure the density of solid and liquid; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified through the top and bottom limitation setting.About the solid mode,function of measuring DIN volume abrasion loss and expansibility of rubber,actual density and apparent density of powder,oil content of oil bearing,density of high density products.etc. adopt the memoryless dynamic measurement method for liquid mode; function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight. Function of displaying concentration,density and baume.
Specifications
Density resolution: 0.0001 g/cm3
Maximum weight:120g
Minimum weight: 0.001g
Measurement range: 0.0001-99.9999g/cm3
Features
(1) No need to open and close the lid,simple operation,shorter time measuring,according to the specification of new materials laboratory.
(2) Show the percentage composition of mixed samples for researching and developing new materials.
(3) Automatically judge whether density is qualified or not;prompt alarm.
(4) Function of solution compensation.either liquid or water can be used as medium.
(5) Function of setting actual water temperature,measuring medium density,and water proof medium density.
(6) Function of setting aerostatic buoyancy and the bound of density.
(7) Adopt the completed high-capacity measurement accessories with the transparent injection mould tank,which can resist wear,fall off,and corrosion.
(8) Density value of samples with the temperature from normal to 100 centigrade can be measured.
(9) Take samples conveniently;50CC or less would be okay.
(10) It is very easy to clean the measurement cup,and can't got the limitation of the size of pycnometer caliber.
(11) Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
(12) Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
(13) Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.
Measurement Procedure Of Solid Mode
Measurement Procedure Of Liquid Mode
Measurement Procedure Of Hydroscopicity Products(Porosity Products)
Specification Table
| Brand | DAHOMETER | ||
| Model | DE-120T | ||
| Density resolution | 0.0001 g/cm3 | ||
| Weight range | 0.001~120g | ||
| Density range | 0.0001-99.9999g/cm3 | ||
Solid | Measuring solid items | Density of all forms of solid,including metal,rubber,plastic,film,floating body,powder,foam,viscous body,structure,tubing,wood,sponge,glass,pitch,cement,soil,gem,paper,concrete,graphite,coal,rock,ceramic.etc.(cover the products of | |
| Measuring mode | Archimedes principle | ||
| Measurable project | density of general non-absorbency solid | ||
| About 5 seconds | ||
| Memory method | memory in shorter time by one procedure | ||
| Specific gravity measurement frame | unicase injection forming professional specific gravity mesaturement frame | ||
| Measurement tank | unicase injection forming transparent professional measurement tank | ||
| Result disply | Disply according to the model:density,specific gravity,apparent density,volume density,wet density,total porosity,effective porosity,oil content,water absorption,wear loss,wear index,expansibility,volume and so on. | ||
| Funtion setting | Water temperature setting,density setting of medium of comparative solution,density setting of medium of waterproofing treatment ,boung setting,aerostatic buoyancy setting, | ||
Mixed | Function introduction | automatically read the percentage of the main material in the two kinds of mixed materials | |
| setting | freely set the density value of main material and subordinate material | ||
| disply | density value,percentage of main material | ||
liquid | Measurement type | a:mobility liquid,vicidity liquid,volatile liquid,corrosivity liquid,high temperature liquid,suspension liquid,emulsion and so on. | |
| Measurement principle | Archimedes principle displacement method | ||
Measurement | 3 group | ||
| Measurement time | about 5 seconds | ||
| Memory mode | memory in shorter time by one procedure | ||
| Result disply | Density and baume | ||
Specific | stainless steel specific gravity measurement frame | ||
| Function setting | Temperature setting,density setting, measurement weights setting of standard sensor ball and weights setting in the water | ||
Measurement | distilled testing | ||
Calibration | auto correction with one button,auto detection. | ||
| Output mode | standard interface of RS-232,output and | ||
| Standard accessories | Host,tank,test board,tweezers,thermometer,100G weight,wind and dust cover,a set of measuring floating body parts ,power transformer,DE-20A standard liquid measurement assembly | ||
| Optional accessories | DE-40 printer,DE-20B anti corrosive liquid measurement assembly | ||
| power | AC100V - 240V | ||
| Main feature | data display,accuracy,speediness,convenience | ||
Shipping And Handling
Items will be shipped out within 3 to 5 working days upon verification payment.
Items will be shipped out via Fedex,DHL or UPS.it will take around 5 to 7 days to get your door given considering everything goes well.
Packaging
Customer Satisfaction
Please don't hesitate to contact us if you have any questions or concerns before or after your purchase. We are committed to your 100% satisfaction.
Feedback
Since your feedback is very important to our business`s development, we sincerely invite you to leave positive feedback for us if you are satisfied with our product and service. It`ll just take you 1 minute. Thank you!
Our Services
About Company
We, Dongguan Hongtuo Instrument Co., Ltd, a China based company, are pleased to introduce ourselves as a notable testing equipments and machines manufacturer.Our company was established in the year 2000 with two primarily motto, which includes complete client satisfaction and to reach top-most position in the international market. The exceptional quality of our products like Gold Tester,Gold Testing Machine,Density Meter,Universal Tensile Testing Machine,Climatic Chamber,Melt Flow Index Tester,Charpy Impact Testing Machine,Tap Density Tester,Abrasion Tester,Ultrasonic Flaw Detector,Surface Roughness Tester and other Laboratory Testing Equipment, etc. is our company's USP.
Cetification
