Complaint
| Model | HW-XC901 | |
| Operating Voltage | 6-24V | Built-in 7550, requires constant power supply, minimum drive 6v/300mA/ ±100mV |
| Static power | <15mA | |
| output method | 3.3/0V | There is a sense of 3.3V, no induction 0V. (The output voltage can be adjusted to a minimum of 5V) |
| Trigger mode | Repeatable trigger | |
| Transmitting frequency | 5.8GHZ | ±75MHZ |
| Sensing distance | 2-11m | Adjustable (dial switch 1, 2) |
| Delay time | 10-1800S | Adjustable (dial switch 3, 4, 5) |
| Photosensitive switch | 10lux-500lux | Adjustable (dial switch 6, 7, 8) |
| Operating temperature | -20--80ºC | |
| Dimensions | 33.5*25*9mm | Support OEM |
| Repeat trigger: After the first trigger, when the sensing area is triggered again, the module delay time will be superimposed again when the first trigger time is not stopped. (For example, the module delay is 10S, the sensing signal is received again in 10S, and then 10S is superimposed. If there is no interruption in 10S, there will always be an output signal) Delay time: refers to the duration of the high voltage signal output. Regardless of the delay, the delay is in milliseconds and can be rushed. | ||
