Complaint
High altitude low pressure simulation test chamber/Altitude test chamber
| Model No | GATC-150 | GATC-225 | GATC-408 | GATC-800 | GATC-1000 | |||||
| Working room(L) | 150 | 225 | 408 | 800 | 1000 | |||||
| Inner chamber size(mm)W*H*D | 500*600*500 | 500*750 *600 | 600*850 *800 | 1000*1000 *800 | 1000*1000 *1000 | |||||
| Exterior chamber size(mm)W*H*D | 1000*1600*1400 | 1000*1750 *1500 | 1100*1850 *1700 | 1500*2000 *1700 | 1850*1600 *2250 | |||||
| Packaging volume(CBM) | 3 | 3.5 | 4.5 | 5.5 | 6 | |||||
| G.W.(KGs) | 320 | 350 | 400 | 600 | 700 | |||||
| Testing temperature range | -190ºC,-160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC, 200ºC,250ºC,300ºC,400ºC,500ºC,600ºC,700ºC,800ºC,900ºC,1000ºC | |||||||||
| Humidity range | 20%RH ~98%RH(Option 10%RH ~98%RH or 5%RH ~98%RH) | |||||||||
| Temp.fluctuation | ±0.5ºC(Room pressure) | |||||||||
| Temperature Uniformity | Atmospheric pressure:±2ºC.-98Kpa Vacuum state:±50ºC.(Options:±5ºC,±10ºC,±15ºC,±30ºC) | |||||||||
| Temp.accuracy | ±2.0ºC(Room pressure) | |||||||||
| Heating up time | ≤60min(+20ºC~+150ºC,RP,No-Load) | |||||||||
| Cooling down time | ≤45min(RP) | ≤60min(RP) | ≤90min(RP) | |||||||
| Pressure range | Atmospheric pressure~-98KPa,-101KPa;~133pa,0pa;~-0.1MPA;~760*10-8mmHg;0.05Torr;1*10-5Pa | |||||||||
| Final Vacuum | 1,No loading,>=1*10-5Pa 2,Loading,>=1*10-4Pa. | |||||||||
| Pressure control tolerance | ±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa) | |||||||||
| Pressure resolution | 0.1KPA(Option 1Pa or 0.0001KPA) | |||||||||
| Depressurization time | ≤20min | ≤25min | ≤30min | ≤45min | ≤50min | |||||
| Working environment | Temp:+5ºC~+35ºC;Humidity:≤90%RH;Airpressure:86-106kPa | |||||||||
| Material | Exterior chamber materia | Stainless steel plate+ powder coated | ||||||||
| Inner chamber materia | SUS#304 stainless steel plate | |||||||||
| Insulation Material | PU Fiberglass wool | |||||||||
| System | Air circulation system | Cooling fan | ||||||||
| Heating System | SUS#304 stainless steel high-speed heater | |||||||||
| Humidification system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser | |||||||||
| Dehumidification system | ADP critical dew point cooling/dehumidifying method | |||||||||
| Controlling system | TEMI880,990 | |||||||||
| Power kw | 8 | 10 | 12 | 15 | 20 | |||||
| Water supply | Water temperature:≤30ºC;water pressure:0.2~0.4MPa;flow rate:≥10T/h | |||||||||
| Other components | Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port. | |||||||||
| Safety protection device | Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp. | |||||||||
| Power supply | AC 3Ψ380V 60/50Hz | |||||||||
| Customized service | Welcome to Non-standard,Specail requirements,OEM/ODM orders. | |||||||||
Q1:Are you manufacturer?
Yes,we are manufacturer.You are welcome to visit our company and check every steps which we are manufacturing Environmental test chambers.
Q2:Which languages can your team support?
Our team can support you English, Chinese,Spanish(Español), Indonesian(Bahasa Indonesia),Japanese.
Q3: If we order is big test chambers from you,how should we install it at our side?
We offer the service of on-site installation and trainning for you.
Q4: Excellent after sale service?
Free parts warranty for 12 months.We can offer support via email,telephone,skype.,etc.On-site technical support can be available with charges by the customer.
Q5:Good Packaging:
The chamber will be covered with air bubble film before put into wooden case, which not only has good shock absorption, impact resistance,heat sealingand also has the advantages of nontoxic,odorless,moisture corrosion,good transparency.
