High Voltage Capacitor Charging Power Supply 20kv 6kj/S

Min.Order: 1

Product origin: Yangzhou, Jiangsu, China

Infringement complaint:

Complaint

US$ -1

Description

CCPS Series High Voltage DC Power Supply Model: CCPS-(N/P)12kW-20kV
Power range: 12KW Voltage range: 20KV Current range: 600mA 6U / 19-inch standard chassis Precise voltage and current setting and measurement capabilities OVP, OCP, short circuit and OTP protections etc.

Overview
The CCPS series is high-voltage power supply specially designed for high-voltage capacitors charging application. It is an upgraded version of CCP series, except for the features of CCP series, CCPS series could give up to 12KW output power by adding internal water-cooling loop, its output voltage ranges from 1KV to 60KV also.
Features
Can be used as a HV DC power supply or as HV capacitor charging power supply. Output voltage adjustable from 0 to 100% Output power: Average charging @ 5KJ/S and the peak charging power can reach 12KW. Charging in constant current mode and switch to constant current mode till fully charged. Unique double isolated system, strong anti-interference ability. Forced air cooling plus internal water cooling, very rugged design.
Optional functions
0 ~ 10V analog signal control (DB interface <6U>) (+AC) RS communication interface (RS232 / RS485 optional) (+RC)
Specifications
Input	Connection mode		Three-phase, four-wire (PE), TN-S supply mode
	Voltage		380Vac±10%
	Frequency		50Hz±10%
	Current		As per output power.
Output	Rated power		12KW
	Output voltage adjusting range		0 ~ 20KV
	Output current adjusting range		0A ~ 600mA
	Output polarity		Positive or Negative (both available) Client must choose one output polarity before ordering.
	Working mode		Constant voltage (CV) / Constant current (CC)
	Accuracy (C.V.)	Line regulation	≤0.5% FS ± 1 digit (Output voltage change rate only caused by changes of input voltage over ± 10% range of variation)
		Load regulation	≤0.5% FS ± 1 digit (Output voltage change rate only caused by full range load changes)
	Accuracy (C.C.)	Line regulation	≤0.5% FS ± 1 digit (Output voltage change rate only caused by changes of input voltage over ± 10% range of variation)
		Load regulation	≤0.5% FS ± 1 digit (Output voltage change rate only caused by full range load changes)
	Temperature drift		≤0.03% FS (Output voltage change rate every 8 hours after power on for half an hour)
	Ripple (p-p)		≤0.5% FS (measured @ 80% ~ 100% rated output)
	Output cable		HV connector and line provided by IdealTek.
	Efficiency		≥90%
	Over-loading capacity		Over-loading capacity
Setting & Display	Control mode	Local	10-turn potentiometer on front panel.
		Remote (Optional)	RS485 communication interface. In line with MODBUS-RTU standard. The user can control and monitor the power supply via RS485 connection with computer, E.g: Power ON / OFF Output voltage & current setting & reading. Working state monitoring (constant voltage, constant current, fault)
	Display mode		4¹/₂ LED digital display
	Display error		≤±0.5%FS ± 1digit (range: 50%~100% of the rated value)
	Display resolution		As per output voltage & current values.
Protection & Monitoring functions	Input protection		Input lack phase protection.
	Output over voltage protection (OVP)		Output over voltage protection value settable. Power supply automatically cuts off output and alarms when output has over voltage.
	Output over current protection (OCP)		Output over current protection value settable. Power supply automatically cuts off output and alarms when the output has over current.
	Over temperature protection (OTP)		Power supply automatically cuts off output and alarms when the internal temperature of the power supply exceeds 85 °C.
	Output short-circuit protection		Power supply automatically cuts off output and alarms when the output has short-circuit.
Over-loading capacity			Withstand working with 1.05 times of rated current.
Noise			≤65dB
Protection degree			IP20
Cooling method			Water cooling + internal water-cooling loop. Direction: The lower part of the left and right sides - In and Top - Out wind.
Inverter transient protection response time			≤10us
Short protection (optional)			CC working when short-circuit.
Working environment conditions	Ambient temperature		0ºC~+50ºC
	Humidity		10%~80%(non-condensing)
	Height		≤1000m
	Location		Indoor use only No conductive dust, gas or steam that destroys the insulating medium No severe vibration and shock, good ventilation.
*Size (WHD) (mm)*			482566.5265.5 (19" 6U standard chassis)
Weight			Approx. 45Kg
Note: every power supply has 48 hours full load burn-in test @ 40ºC
Safety caution
This power module has HV output, only professional person could operate it. Please make sure of good grounding before operation. Capacitor charging power supply has low internal stored energy, please NO no-loading working. Keep power module clean and good ventilation. HV input & output connectors or HV load no touch anything.