Round Square Tube Polishing Machine Duct Linishing Machinery with Abrasive Flap Wheels

Description

Semi-auto Feeding Rack

Semi-auto Loading Rack

Dust Extraction System

Parameters of Dust Removing System

Item name	Round throwing dust removal system	Side throwing dust removal system
Air volume	30000m³/h	76000m³/h
Wind pressure	450Pa	900Pa
Total power	19KW	38KW
Fan power	1x15KW	2x15KW
Pump power	1x4KW	2x4KW

Dust Removal Process Brief Introduction:
 1. During polishing, since the pipe and the polishing material rub against each other, resulting in polishing dust (main components: grinding wheel powder, hemp wheel powder, polishing wax, fine steel particles, etc.), it is necessary to adopt a dust removal process to achieve environmental protection and protect workers' health.
   
2. For the dust generated by polishing, the dust removal method generally adopts the wet dust removal method. The wet dust removal method makes the dust-containing gas in close contact with the liquid (generally water), utilizes the inertial collision of the water droplets and the particles or utilizes the sufficient mixing effect of the water and the powder tip. Other means of trapping particles or increasing or leaving the particles in a fixed container to achieve water and dust separation.

3. Wet dust removal can effectively remove liquid or solid particles with a diameter of 0.1-20 microns from the gas stream, and at the same time, remove some gaseous pollutants. The utility model has the advantages of simple structure, small occupied area, convenient operation and maintenance and high purification efficiency, and can handle high-temperature and high-humidity airflow, and minimizes the possibility of fire and explosion.

After repeated spraying and dust removal, the emission standards are met.

Why Choose Us?

1.Main shaft
Without treament: easy to be rusty                                  With treatment:                                                   


2. Adjusting screw nut:
Normal type                                                                                                Copper type


3. Ammeter
Without ammeter                                                                        With ammeter


4. Pulley
Old model: slot pulley plus ordinary V-belt                           New model: slot pulley with toothed V-belt


5. Program control: fine-tuning a single time only 0.12 mm, not crushing the tube




Intergrated services:

  1. Offer reasonable investment plan, reconmmend the appropriate models based on actual maket situation.

  2. Offer layout of production line based on customer plant's drawings.

  3. Offer the base drawings required for installation.

  4. Offer machine's installation and commissioning by sending technicians, until machines operates normally.

  5. Offer professional training, until the buyer's operator command machine's operation.

  6. Offer and coordinate auxiliary components, accessories, and spare parts.

  7. The warranty is 1 year long, excluded situation of human-damage. If you have any question about machine operating, just contact us via mails or phone call, we will solve the problem for you immediately.


About SEKO



FAQ  
1. Which countries your products are exported to?
Our products are sold all over the world and with related certifications.

2.How about the warranty?
All our products have one year quality warranty, during the warranty time, the spare parts replacement is free. And we provide life long time technical support and other assistance.

3.How to install your machine?
Usually speaking, engineers will be sent to your factory to help to install and adjust the machines. We also have paper installation instructions and videos, teaching you till you command it.

4. Which export port you use?
Any China ports. Commonly, we will use Shenzhen port. But it can be appointed as you like.

5. How about the payment terms and delivery time ?
Payment terms for small machines: 100% T/T/ Western Union/Cash in advance.
The big machines and big amount: 40% deposit, 60% before shipment (we will shoot total delivering process for customer's confirmation) and the related papers. You can pay by T/T,L/C, Western Union or other ways.
The machine delivery time is within 45-90 days.

6.Is your goods with ISO9001 or CE certificate ?
Yes, all our goods has ISO certificate. All machines are high quality goods.

7.What is your nature of your company:dealer or factory ?
We are manufacturer with a big factory ,warmly welcome to visit our factory and contact us.