Complaint
| Welder model | MIG-350P | MIG-500P |
| Rated input voltage | Three-phase communication,380V±10%,50Hz | |
| Rated input current (A) | 25A | 38A |
| Rated output capacity | 16 KVA | 25 KVA |
| Output no-load voltage (V) | 65V±5% | |
| Rated load duration | 60% | 60% |
| Power factor COSφ | 0.93 | |
| Efficiency η | 90% | |
| Dimensions (mm) | Water cooling:965×472×925 / air cooling:965×472×686 | |
| net weight | Water cooler :70kg / air :52kg | Water cooler:73kg / air:55kg |
| Welder type | MIG-350P | MER-500P |
| Rated current (A) | 10~350 | 10~500 |
| Thermal arc current (HOTI) | OFF/ON | |
| Factory Reset (DFLT) | NO/YES | |
| Welder model | MIG-350 | MIG-500 |
| Rated current (A) | 10~350 | 10~500 |
| Arc current (HOTI) | 10~200A | |
| Current ramp up (UPSL) | 0.1~10s | |
| Air time (GPR) | 0.1~20S | |
| Gas lag time (GPO) | 0.1~20S | |
| Four-step arc current (CRAT) | 10~100% | |
| Current descent (DWSL) | 0.1~10s | |
| Welder specifications | MIG-350 | MIG-500 | |
| Rated current (A) | 30~350 | 30~500 | |
| Plate thickness (mm) | 0~25 | ||
| Wire feeding speed (m/min) | 1~22 | ||
| Arc length | -99~99 | ||
| Arc force | -50~50 | ||
| Control mode (CNTR) | LOCL/REMT | ||
| WIRE (material) | STEEL CN19 AlMg5 AlSi5 Al CuSi3 CuSi CuAl9 | ||
| Wire diameter (DIRM) | 0.8,1.0,1.2,1.6 SP | ||
| Air time (GPR) | 0.1~20S | ||
| Slow wire feed speed (FDC) | 1.0~10M | ||
| Initial current (I-S) | 10~200% | ||
| Arc current (I-E) | 10~200% | ||
| Four-step fall time (DWSL) | 0.1~1.0S | ||
| Four-step arc current (CRAT) | 10~100% | ||
| Gas lag time (GPO) | 0.1~20S | ||
| Burnback time (BURN) | 0.01~1.0S | ||
| Factory Reset (DFLT) | NO/YES | ||
| Double pulse adjustment parameter | |||
| Double pulse frequency (TPHz) | 0.1H~5.0H | ||
| Double pulse current size (TPBA) | 20%~80% | ||
| Double pulse duty cycle (TPBT) | 20%~80% | ||
| Double pulse voltage (TPBU) | -50~50 | ||
| High speed vertical adjustment parameter | |||
| Vertical welding frequency (UPHz) | 0.1H~5.0H | ||
| Short circuit transition duty (UPD2) | 20~80% | ||
| Short circuit transition current (UPC2) | 60~250A | ||
| Short circuit transition voltage (UPU2)(UPU2) | -50~50 | ||
| Short circuit transition inductance (UPI2) | -50~50 | ||
| High speed pulse welding adjustment parameters | |||
| High Speed Pulse Welding Increment (SPS) | 0~50% | ||
