Description
Sanitary EPDM Rubber Parts Molded Gasket Rubber Seals Gasket
It is widely applied to many fileds, such as beer, beverage, dairy food, fruit juice, pharmacy, biological etc.
| Materials |
| · Material: | Viton |
| Screen mesh: 10, 20, 40, 60, 80, 100, 120, 150, 200, 300, 400 mesh and so on. |
| · Size: | 1/2"-12" /DN15-DN300 |
| · Gasket: | SMS,DIN,3A,IDF,ISO,RJT |
| · MOQ: | 50pcs each size |
The Funtions for Sanitary Silicone Gasket
| 1. | Has excellent heat resistance,cold resistance,ozone resistance,aging resistance |
| 2. | Has very good insulation performance |
| 3. | The tensile strength is poor and it is not resistant to oil. |
| 4. | -55Celsius Degree~250 Celsius Degree |
The Function for Sanitary EPDM Gasket| 1. | Has good weather resistance, ozone resistance,water resistance and chemical resistance |
| 2. | Used for high temperature water vapor seal |
| 3. | -55Celsius Degree~150Celsius Degree |
The Function for Sanitary VITON Gasket| 1. | High temperature resistance than silicone rubber, has excellent weather resistance, ozone resistance and chemical resistance |
| 2. | For most oil and solvent resistance |
| 3. | -20Celsius Degree~250Celsius Degree |
The Function for Sanitary NBR Gasket| 1. | Suitable for oil system hydraulic oil, glycol system of hydraulic oil, two ester series lubricating oil, gasoline, water, silicone grease, silicone oil and other media use |
| 2. | The most widely used, the lowest cost of rubber seals |
| 3. | -40Celsius Degree~120Celsius Degree |
Sealing ring also pays attention to the following conditions| 1. | Flexibility and elasticity |
| 2. | Appropriate mechanical strength, including tensile strength, elongation and tensile strength etc. |
| 3. | Stable performance, easy to swelling in the medium, heat shrinkage (Joule effect) small |
| 4. | Easy processing, and can keep the precision dimension |
| 5. | No corrosion no pollution to medium contact surface, etc. |
Advantage of Sanitary Gasket| 1. | The sealing ring in the work pressure and temperature range, good sealing performance, and with the increase of pressure can improve the sealing performance |
| 2. | The friction between the sealing ring and the moving parts of the device must be small, stable friction coefficient |
| 3. | The corrosion resistance of the sealing ring is strong, not easy to aging, long service life, good resistance to abrasion, wear can automatically compensate to some extent |
| 4. | Has the advantages of simple structure, convenient use and maintenance, the sealing ring has a longer life |
Our Service| On Samples | Buyer bear the air fee, but this fee will be reduced from order directly |
| On After Sales | Free replacement if there is any quality problem |
| On Delivery | Never delay delivery time |
| On Materials | Ensure material pure |
| Ensure material pure | Welcome |
Complaint
