The three-phase synchronous motor for TK air compressor complies with relevant IEC international standards. The synchronous motor excitation system uses a static thyristor excitation device. The motor allows direct start at full pressure, and can also be stepped down when the grid capacity does not allow full pressure start. This series of motors has the advantages of compact structure, high efficiency, low noise, low vibration, high reliability, convenient installation and maintenance. The high-voltage synchronous motor of this series has the protection degree of IP00 and the cooling method is IC01. If other protection levels and cooling method requirements are adopted, it can be negotiated with the user. The rated voltage of this series of motors is 6000 volts, and the allowable voltage of 10000 volts is within ±5%. The rated frequency of the power supply is 50 Hz and the rated power factor is 0.9 (leading). TK series large three-phase synchronous motor is mainly used to drive reciprocating (piston) air compressors. It is suitable for motors of refrigeration and fertilizer equipment, and can also be used to drive pumps, fans and other general mechanical equipment.
Motor Name: High-voltage synchronous motor for TK air compressor Power range: 250KW-5000KW Speed range: 200-1000 r/min Rated voltage: 380V/3000V/6000V/10000V Rated frequency: 50HZ/60HZ Power factor: 0.9 Insulation class: F Protection level: IP00/IP21/IP23 Installation method: IM7311/IM5710 Working system: S1 Excitation mode: static thyristor, other excitation methods can also be used Connection: Y Cooling method: IC01. Other forms of motors can also be produced according to user requirements, such as duct ventilation and air and air cooling. Altitude: no more than 1000m Slip rings can be divided into common structure or slip ring positive pressure ventilation. This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).
TK series air compressor motors have advanced power factor (which can improve grid power factor), high efficiency, high stability and high overload capability, and have the performance that the speed does not change with the load, especially when the speed is lower than 600r/min. The performance is significantly better than the asynchronous motor of the same speed.
Our company's motor manufacturing factory adheres to the concept of green, efficient and energy-saving production service, pays attention to the harmonious development of internal and external environment, builds environmentally friendly motor manufacturing enterprises, strictly implements motor standard process, and selects high-quality energy-saving materials to ensure the quality of motor products.
The company insists on providing high-quality motor products and services to users, and has won high praise from many domestic and foreign customers. The company will receive many foreign merchants to visit our factory every year, and establish a good cooperative relationship through on-site inspection of our factory. Our company always welcomes customers to visit our factory.
1. The outer packaging of the products are all standard export-oriented wooden plywood packaging. 2, the product packaging is protected by moisture, water plastic soft packaging 3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the target mark will be printed on the package. 4. There are obvious signs and symbols on the packing box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).
Complaint
