Multi-Function High-Pressure Cleaning Car/Residential Road Washing Car

Min.Order: 1

Product origin: Zhengzhou, Henan, China

Infringement complaint:

Complaint

US$ 2700 ~ 3000

Description

Part I: Why choose us?

1.All parts of the vehicle are driven by batteries, no noise, no emissions, no pollution, and it is a true clean energy sweeper.

2.High efficiency, low failure, easy operation and low use cost, especially suitable for urban night work without disturbing the people.

3.The control system adopts an integrated control system, which is professional, convenient and highly reliable.

4.All-aluminum cab, lightweight, thermal insulation and anti-corrosion.

5.The cab is equipped with a fan, and adopts a panoramic full-view glass structure and high-quality thermal insulation structure to ensure that the driver has a comfortable driving environment with a wide field of vision.

6.The dust reduction system uses a specified medium-pressure water pump, an aluminum alloy water tank and a specified atomizing nozzle to ensure that the cleaning machine will not bring secondary pollution.

7.The motors of the traveling system and the working device adopt high-efficiency, low-consumption, high-quality AC motors, with high efficiency, good reliability, and long trouble-free working hours.

8.The steering part adopts a re-circulating ball-type electric power-assisted system. The steering is reliable, flexible and easy to operate

Part II: Features of the Washer Car
1. Body integrated rotational molding, imported PE material, beautiful and generous, built-in front and back double air duct, up and down convection duct, left and right convection port, all-round guarantee the hot gas emission

2. Water tank partition design, reduce the vehicle center of gravity, prevent the risk of vehicle rollover

For the double air duct design of the water tank, the water tank is naturally isolated in the left and right directions and divided into three sections. Through the water tank sinking, the center of gravity is reduced to prevent the vehicle from rollover due to the flow and shaking of water in the water tank. The water tank sinks under the chassis with a volume of about 80 liters, which can effectively reduce the center of gravity of the whole vehicle and reduce the risk of rollover when the vehicle is driving and turning.

3. Hydraulic oil brake is adopted for the rear wheel brake to make the brake more reliable
4. Provide fuel safety
The upper installation adopts rolling molding process, primary molding, front and rear warehouse design, isolation water tank and cleaning machine. The 33 liter plus tank, working for three working days at a time, with the oil level digital display meter, and the tank built into the center of the tank, separated from the engine of the rear tank cleaning machine, to prevent the frequent refueling of the machine and the high temperature of the engine from causing flammable and explosive gasoline.

Part III: Dates of the Washer Car

Name		technical parameter
Front fork damping	External spring tube damper	Walking power	It adopts ≥1500W motor with strong power
Pump parameters	≥28MAP Flow≥15L/min	Water tank	Plastic water tank, water tank volume ≥650 L
Battery / voltage	Lithium iron phosphate battery capacity ≥ 72V 80AH	Tyre	Heavy duty load bearing tire, front wheel 4.0-12, rear wheel 4.5-12
Braking system	The front drum type rear hydraulic brake is adopted, and the parking handbrake is equipped	Controller position	The controller is installed on the side of the car body for easy maintenance
Minimum braking distance (m)	≤ 4m	Minimum ground clearance (mm)	≥140mm
High pressure pump	The original imported reciprocating piston pump is adopted	Engine	The engine of joint venture brand is adopted, the power is more than or equal to 13HP, and the starting mode is electric starting
Reel	Automatic telescopic pipe winder is adopted, and the length of high pressure pipe is more than or equal to 18 meters	Dimensions	320011001400(mm)

Part IV: Application of the High pressure car wash

High pressure washing is mainly used to clean the garden, landscape, industrial park and other environment

Part V: FAQ

Q1.What about your guarantee ?
A: The machine's guarantee is 12 months.

Q2.Would you accept the ODM or OEM ?
A: Accept the OEM /ODM ,but it must be No infringement of third party .

Q3.What's the MOQ?
A: No requirements.

Q4.What about your delivery time? Can we receive our goods on time?
A: Delivery date is within 7-15working days after receipt of the deposit .Yearly on-time

Q5.What quality system has been gained for your factory ?
A: We have gained : ISO9001, CE for our factory and products.

Forward

Related products