1.5 Layer Paper Machine Polyester Wire for Paper Making

Min.Order: 1
Product origin: Zhoukou, Henan, China
Infringement complaint: complaintComplaint
US$ 1 ~ 10000

Description
 

Product Description

 

A single layer forming fabric has the simplest weave pattern. It is composed by one CD yarn and one MD yarn system. Single layer forming fabrics can be woven into various patterns for different performance and applications.Single layer forming fabric is suitable for low speed paper machine

According to their weaving shed,It includes four different forms:
1. 4-shed (one up and three down) : Mainly used for various paper machines.
2. 5-shed (one up and four down) : Mainly used to produce all kinds of kraft paper, tissue paper, writing paper, printing paper, etc.

3.8-shed (two up and six down) : main is suitable for making sack paper, kraft paper, liner board, corrugated paper, cardboard paper, etc.


Produce Process

                                           warping                                                                                                        First heat-setting
 

                                            seaming                                                                                                                     2nd  heat-setting

                                            testing                                                                                                                         packing 



 

Product Parameters

 

SeriesModelFilament Diameter (mm)Density(root/cm)Tensile StrengthThickness
(mm)
m³/m2.henlongation
WarpWeftWarpWeftSurfaceJoint
4-shedcxw272540.200.253022≥600≥4000.4980000.6%
cxw272740.200.273021.5≥600≥4000.5178000.6%
cxw312040.180.203528≥600≥3800.4375000.68%
cxw31204-10.180.203530≥600≥3800.4370000.68%
5-shedcxw302050.170.203228.5≥500≥3500.4171000.6%
cxw312150.200.213532≥600≥4000.4870000.6%
8-shedcxw253580.220.352819.5≥700≥5000.8590000.65%
cxw253880.220.3829.519≥700≥5000.8785000.65%
cxw273580.220.353020≥700≥5000.8585000.65%
cxw254580.220.452915.2≥700≥5000.8775000.65%
 

Company Profile

 


 
 

Installation Instructions

How to Install Forming Fabric
1. Before installing the forming wire, you should kindly check and rinse the equipment surface ,making sure it is in good condition. the surface of wires should be forbidden from unevenness, slanting, burr, sand, etc.
2. The running direction must be in accordance with the direction of the arrow on the wire.The wire should be placed in the correct position, and all rollers should be paralleled with each other to prevent the wires from being deflected.
3. There should be a high-pressure water device that can be swinging. Water pressure must be controlled in 6-10 kg/cm² for the medium and low-speed paper machine; speed more than 350m/min, water pressure is 10-15 kg/cm².When using multi-layer forming wire, water pressure is 15-30 kg/cm².Meanwhile water should be clean and without sand.
4. After putting the forming wire into paper machine, firstly check the wire,then slightly tension the wire, add water to lubricate the operation, slowly adjust the tension to normal value. Keep the tension at 3-4 kg/cm² for the low-speed paper machine, and high speed machine at 4-6 kg/cm².

 


 
Scroll to Top