Complaint
Ronen Group is the leading group of manufactures that dedicated to supplying the most innovative and cost-efficient solutions for Wires/ Rods/Tubes/ Sheets/ Induction Heat Treatment Equipment etc.. And also supply Shot Blasting Machines, mainly including:Turntable shot blasting machine,pipe shot blasting machine, Mesh belt shot blasting machine, Catenary shot blasting machine, Road shot blasting machine, Drum shot blasting machine, Hook type shot blasting machine, Wire stock shot blasting machine, Trolley shot blasting machine.
Hook type shot blasting machine
Hook Type Shot Blasting machine is for surface cleaning or strengthening treatment of small castings, forging parts in industry of foundry, building, chemical, motor, machine tool etc. It is special for surface cleaning and blasting strengthening on various types, small production castings, forging parts and steel construction parts for clearing little viscous sand, sand core and oxide skin. It is also suitable for surface cleaning and strengthening on heat treatment parts, especially for cleaning slightness, thin wallparts which is not suitable for impact. It has the advantages of no pit, compact structure, and high productivity.
Catenary Type cleaning machine
The catenary pass-through shot blasting machine can run continuously, step by step, or use advanced accumulation and push catenary to transport the workpiece, so that the workpiece is stopped in the loading and unloading and shot blasting areas to achieve fixed-point loading and unloading. The fixed-point shot blasting process, according to the different workpieces, can be lifted at a single point of 50-2000kg, and has high productivity and reliable operation. It is very suitable for mass cleaning of various easy-hanging parts. Generally, it can be designed and manufactured according to user product requirements. The catenary shot blasting machine is suitable for shot blasting, deburring, descaling, etc. of parts with holes that can be suspended, various welded steel structural parts, and various casting and forging parts. Such as engine cylinder head, motor housing, gears, motorcycle engine housing, locomotive hook and tail frame assembly, bogie assembly, hardware tool housing, water pump, etc. The cleaning effect is particularly good. It is an ideal choice for industries such as automobiles, tractors, diesel engines, motors, and valves.
Drum shot blasting machine
Drum shot blasting machine is suitable for cleaning all kinds of castings and forgings that are not afraid of collisions and scratches. It is an ideal equipment for cleaning residual sand and oxide scale on the surface of workpieces in small heat treatment workshops. It mainly includes drums, separators, shot blasters, and elevators. , Geared motor and other components. The drum type shot blasting machine mainly uses the high-speed rotating impeller to throw the projectiles onto the continuously overturned workpiece in the drum, so as to achieve the purpose of cleaning the workpiece, which belongs to the scope of casting machinery.
Steel Wire Rod Coils Shot Blasting Machine
This machine is a special equipment for wire cleaning. It uses the shot blasting process to remove the oxide scale on the wire surface. Compared with acid The washing treatment method has the characteristics of economy, environmental protection and high efficiency. The equipment adopts a unique "rotating gate + double cantilever shaft" to carry the wire, which greatly improves the production capacity of the equipment. The cantilever shaft is made of alloy steel, so that the wire rod performs a compound action of "up and down + left and right swing + positive and negative rotation" during the shot blasting process to achieve a thorough cleaning effect. The reasonable arrangement of the shot blasting device enables the inner and outer surfaces of the wire to be effectively hit by the projectile. The whole machine is controlled by PLC, which is convenient and reliable to operate.
Mesh belt through-type shot blasting machine
The mesh belt through-type shot blasting machine uses a conveyor mesh belt as the carrier of the workpiece, and the conveyor mesh belt is divided into two ways: steel mesh belt and wear-resistant rubber belt. One end of the shot blasting chamber is a loading station, and the other end is an unloading station. When working, the parts are placed on the conveyor belt at the loading station, the conveyor belt slowly and continuously enters the shot blasting room for shot blasting cleaning, and then sent to the unloading station to remove the workpiece. The characteristics of this machine are: continuous work, no collision, suitable for small and medium parts, and large production batches. Mesh belt shot blasting machine is generally suitable for large quantities of surface cleaning parts or parts that only clean one surface, kitchen utensils, aluminum pots, soup pots, frying pans and large quantities of highly complex parts.
hook type shot blasting machinetem | Model | Cleaning workpieces size diameter×heightt(mm2) | The carrying capacity of unit hook(kg) |
Q375 | Single-hanger | 500×1000 | 500 |
Q376 | Double-hanger | 800×1200 | 600 |
Q376E | Single-hanger | 800×1200 | 600 |
Q378 | Single-hanger | 1000×1500 | 800 |
Q378E | Double-hanger | 1000×1500 | 800 |
Q3710 | Single-hanger | 1200×1500 | 1000 |
Q3710E | Double-hanger | 1200×1500 | 1000 |
Q3720 | Single-hanger | 1500×2000 | 2000 |
Q3730 | Single-hanger | 1500×2000 | 3000 |
Q3750 | Single-hanger | 2000×2500 | 5000 |
Machine type | Max. diameter of workpiece batch(mm) | Max. weight of workpiece(kg) | No.of wheels Power(kW) |
HT 04/05 | 700 | 600 | 2x7.5 |
HT 08/09 | 1000 | 800 | 2x11 |
HT 12/09 | 1200 | 1000 | 2x15 |
HT 12/11 | 1400 | 2000 | 3x15 |
HT 12/11Q | 1600 | 3000 | 3x15 |
QGH18/52 | 1800 | 5000 | 4x15 |
QGH30/30 | 3000 | 10000 | 5x15 |
Machine type | Max. workpiece Dia. x L (mm) | Max weight(kg) | Total installed power(KW) |
HT 04/05 | 300*600 | 5000 | 41 |
HT 08/09 | 500*1200 | 8500 | 72 |
HT 12/09 | 800*2000 | 8500 | 143 |
HT 12/11 | 1000*2500 | 10500 | 147 |
HT 12/11Q | 1200*3000 | 10500 | 157 |
material | specification | Toss time(min) | Line Loss(%) |
45# | φ6.5 | 12 | 0.18 |
45# | φ6.5 | 10 | 0.12 |
45# | φ6.5 | 10 | 0.12 |
45# | φ6.5 | 8 | 0.12 |
SWRH82B | φ12.5 | 6 | 0.17 |
SWRH82B | φ12.5 | 8 | 0.243 |
SWRH82B | φ12.5 | 8 | 0.194 |
SWRH82B | φ12.5 | 8 | 0.219 |
SWRH82B | φ12.5 | 10 | 0.244 |
SWRH82B | φ12.5 | 10 | 0.244 |
SWRH82B | φ12.5 | 10 | 0.292 |
Machine type | Max. workpiece Dia. x L (mm) | Max weight(kg) | Total installed power(KW) |
HT 04/05 | 300*600 | 5000 | 41 |
HT 08/09 | 500*1200 | 8500 | 72 |
HT 12/09 | 800*2000 | 8500 | 143 |
HT 12/11 | 1000*2500 | 10500 | 147 |
HT 12/11Q | 1200*3000 | 10500 | 157 |
industry furnace
1.Q:Are you manufacturer? A:Yes, We are manufacturer.
2.Q: What are the payment terms?
A: Pattern of pattern :we can accept L/C ,T/T , Western Union , Money Gram
3. Q: What is the whole business flow cooperation with us ?
A:1.Firstly,send your inquiry to us,make us have learned your requirement
2.We will be drawing a proforma invoice according to your requirement ,and start
production after you finished to pay 30% deposit.
3.All of the goods, packing details, and B/L copy will be send to buyer after finished
production. We will arrange shipment and provide original B/L after the buyer finished to
pay the balance.
4. Q: What if you encounter technical problems?
A:Please contact us as soon as possible and let us know what kind of technical problems
you encounter and the details. We will give you a solution within 24 hours.
5. Q: What advantages we have?
A: Rich experience: We have been in this line for 20 years . we can provide solution according
to the problem of the buyer meet in the production process
B: We have Adopt first class motor from SIEMENS, install the reasonable welder according to
the requirement of buyer's production , use the full-automatic grinding control system,
eddy current flaw detection system, infrared testing device.
