This machine combines both milling and dispersing function. New design with energy saving, high eff eciency, easy operation,easy maintenance, cleaning and changing color.Applicable for ndependent tank operation and high/low viscosity paste.
Is designed as a handy and practical experimental machine specifically for narrow space, like a lab. . Speed adjustment can be made with inverter as needed for optimal dispersing effect, which can also be applied to the production of even larger batches on site. . Operates in dispersion or mixing modes, to be selected as needed by the experiments, to embody a simplified piece of lab equipment and save space. . Designed with mixing shaft that can be changed rapidly, helping reducing standby time for cleaning and pollution from changing colors.
1,Used suitable Dispersing Blades(default is 60mm diameter)and install to the main shaft. 2,Put beads into basket from the above (the amount of beads should be 70% of milling basket capacity). 3,Lifting basket to put in the barrel and put it down slowly to the right place, then lock up the locking handle. 5,Make sure the Dispersing Blades at the right place where is no touch with the barrel, then start up. 6,Press" "button to start the machine, then turn the Speed control knob to adjust the speed. 7,Must slow down the speed before turn the machine off and then press the button "STOP" to shut it down. 8,Pls clean and maintain it after use.
Notice:
1,Pls make sure the speed should be in low speed before start. 2,Pls slow down the speed before press the "stop" button. 3,Frequency conversion has been set before out of factory, pls don't change . 4,Beads and Dispersing Blades can be take off to clean up.
Complaint
