Product overview: KYLR hot water circulation pump is a high efficiency energy-saving product successfully designed by means of adopting the property data of IS model centrifugal pump and the unique merits of vertical pump and strictly in accordance with ISO2858 world standard and the latest national standard and an ideal product to replace IS horizontal pump, DL model pump etc. Ordinary pump. It can delivery clean water or hot water at any environment.
The flow range is 1.5~1200m³/h and the strode range 8~150m and there are basic type, by-pass type, A. B. C cutting type etc. More than 250 specifications. And per the different flow medium and temperature. KYLR hot-water circulation pump, of the same type and same proporty data have neem designed and made.
Product Features: 1. Compact structure, small volume, beautiful outlook. The lower barycenterm of the vertical structure which coincides with the center of the pump feet strengthens the stability of running and the duration. 2. Easy to mount. Because of the same apertures of both inlet and outlet which also locate on the same central line, the water circulation pump can be directly mounted on any part of the pipeline just as a valve. The motor is covered with a rainproof cap so that operation can be done outdoors. Mounting feet are equipped with the pump so that it can be stably mounted. 3. Stable running, low noise, high concentricity of components. Beatings of low noise are used for the motor, the impellers are of best dynamic and static balance, no vibration at running and the environment thus being improved. 4. No leakage. The shaft is mechanically sealed with carbide alloy wearable material, settling the serious leakage of the filling seal of a centrifugal pump, extending the duration and ensuring the operation place clean and tidy. 5. Easy to maintain. Not necessay to remove the pipeline for check-out and maintenance, only to take out the nuts on the pump lid, the motor and the driving components. 6. KYLR hot water circulation pump, according to the operation condition of the worksite, may be vertically, horizontally etc. multiways mounted and also according to the requirements for the flow stroke, mounted in parallel and/or in series to increace the needed flow and stroke.
Application: KYLR hot water circulation pump is used for the warming hot-water booster circular system and the hest-transport system of production technology in the units where heat-station, residual hest untilization, metallurgy, chemistry, tectile, wood-processing, paper-making etc. industrial boilers high-temperature hot-water, the operation temperature is below 100ºC.
Working conditions: 1. If the pressure is larger than 1.0MPa so as to use cast steel material for the over-flow and joint parts. 2. Proper medium: the medium for pure-water pumps should have no corrosive liquid and the volume of non-melting medium-solid should not be over 0.1% of the unit volune and the grainness less than 0.2mm. 3. No larger than 40ºC for the ambient temperature, no higher than 1000m of the above-area level and no more than 95% of the relative Humidity.
Notes of installation 1. Do not apply the pipeline weight on the pump in erection so as to prevent it from deformation; 2. Both pump and motor are intergrally structured and no need of calibration on them in erection, so it is easy to mount; 3. Tighten the foot bolts in erection so as to avoid affecting the pump's performance due to the vibration at Starting; 4. Before erection, please carefully check if there is any hard matters (such as stones, iron dregs etc.) inside of the pump's flow-path which would affect its running so as to prevent both impeller and pump casing from being damaged during running; 5. For the sake of convenient service and safe use, mount one regulation valve on both inlet and outlet pipelines of the pump and one piezometer near the outlet to guarantee it to run with in the rated head and flow quantity as well as to run normally and extend its dura-Bility.
Company profile: Company profile: Shanghai Kaiyuan Pump Industrial Co.,ltd History: 15 years experience of manufacturing water pumps; Scale: Covers working area of 8,000 square meters; have more than 400 employees; Technology: A group of professional technical engineers and a strong R&D team; Management: Scientific management and strict quality control system;
Complaint
