Complaint
Description for SMC:
The formula is specially designed for products requiring very high strength. The resin, thickening agent, release agent, filler, mixed high temperature curing agent, coating in the 2 films, fiberglass direct roving and fiberglass chopped strand, sprinkle in the coating resin paste film, the 2 layer composite thin film, the glass fiber soaked through automatic packaging, folding machine, and then in the drying room temperature through thickening time, achieve the molding viscosity requirements, namely into finished products. Appearance: Zig-zag package, outside the aluminum film| Item | Standard | Date | Remark |
| Density( g/cm³) | GB1463-88 | 1.75 -1.85 | |
| Glass fiber content(%) | GB/T15568-95 | 35 | |
| Water absorption(mg) | GB1462-88 | ≤20 | |
| Average Shrinkage (%) | GB/T15568-95 | ≤0.15 | |
| Tensile Strength(Mpa) | GB1447-83 | ≥110 | |
| Flexural Strength(Mpa) | GB1449-83 | ≥240 | |
| Impact Strength( kJ/m²) | GB1451-83 | ≥100 | |
| HDT(ºC) | GB1634-79 | ≥220 | |
| Color | Grey | ||
| Type | Application |
| SMC-A (electric) | High mechanical strength products such as high/low voltage switch box, insulation plates |
| SMC-B (flame retardant) | High mechanical strength and flame retardant products such as signal lamps, cable tray |
| SMC-C (high-strength) | Special high mechanical strength products such as hammer handle |
| SMC-D (general purpose) | Non-electric products such as chair, water tank |
| BMC-A (electric) | Electric parts with common mechanical strength |
| BMC-D (general purpose) | Non-electric press mould products with common mechanical strength |
