Model Parameters | GS8KW | GS10KW | GS12KW | |
AC Input | Nominal Power | 8KW | 10KW | 12KW |
Input Voltage Waveform | sinusoidal(utility or generator) | |||
Nominal input Voltage | 230VAC | |||
Low Line Disconnect | 184Vac±4%(Normal) or 135Vac±4%(Wide) for 230V | |||
Low Line Re-connect | 194Vac±4%(Normal) or 145Vac±4%(Wide) for 230V | |||
High Line Disconnect | 263Vac±4%(Normal) or 263Vac±4%(Wide) for 230V | |||
Max AC input Voltage | 230V for Max270V | |||
Frequency | 50Hz:41-54Hz, 60Hz:51-64Hz | |||
AC output | Output Voltage Waveform | Sine wave | ||
Power Factor | 0.9~1.0 | |||
Nominal Output Voltage(V) | LV:120Vac ±10%rms, HV:230Vac ±10%rms | |||
Nominal Output Frequency (Hz) | 50Hz ± 0.3Hz, 60Hz ± 0.3Hz | |||
Solar charger | Rated Charge Current | 60A | ||
PV Input Voltage range | 60-110VDC for 48V | |||
Max.PV open circuit array voltage | 48V for 110Vdc | |||
Charger mode | MPPT | |||
PV Low Voltage Re-connect | PV≥Bat.V+3V | |||
PV Low Voltage Disconnect | PV<=Bat.V | |||
Efficiency | ≥97% | |||
AC Charger | Nominal Charger Current | 20A/35A/50A/70A/90A( 5 stages adjustable charging current) | ||
Over charge Protection | Bat.V≥31.0VDC for 24V battery, Bat.V≥62.0VDC for 48V battery beeps 0.5s every 1s & fault after 60s | |||
Charger | Nominal Charger Current | 20A/35A/50A/70A/90A(According to the inverter model) adjustable 5 stages charging current | ||
Over charge Protection | Bat.V≥15.5VDC/31.0VDC/62.0VDC, beeps 0.5s every 1s & fault after 60s | |||
Efficiency | Efficiency(Battery Mode) | ≥87% | ||
Efficiency (Line Mode) | >98% | |||
Battery Voltage | Nominal DC input Voltage | 48VDC | ||
Low Battery Alarm | 42VDC±1.2VDC for 48VDC | |||
Low DC input shut & down | 40VDC±1.2VDC for 48VDC | |||
High DC input Alarm & Fault | 64VDC±1.2VDC for 48VDC | |||
Transfer Time | AC tO DC | 20ms(max) | ||
DC tO AC | 15ms(max) | |||
System Parameter | Over-Load Protection | 110%the output,load>150%,beeps 0.5s every 1s,and Fault after 20s | ||
Output Short Circuit Protection | Current limit (Fault after 10s) | |||
Surge Rating(10s) | 1:3(VA) | |||
Power Saver | Load≤25W(Enabled on "P/S auto"Setting of Remote control) | |||
Protections | Low battery, over charging, over load, over temp | |||
Indicators | LED+LCD Display | |||
General Specifications | Operating Temperature Range | 0ºC~40ºC | ||
Storage Temperature | -15ºC~60ºC | |||
Operation humidity | 5% to 95%(non-condensing) | |||
Audible Noise | 60dB max | |||
cooling | Forced air, variable speed fan | |||
Dimension(L*W*H) | 627*416*204mm | |||
Net Weight(kg) | 52.5 | 58.5 | 66.5 |