Description
Emergency Truck Jump Starter with Electric Jack +Air Inflator (3 in 1)
Item No.: JS-EP96
Selling point:Electric jack+ air inflator+ car jump starter(3 in 1)
Main functions:Product highlights:12000mAh Big capacity
12V 400 Amps jump start engine size up to 4.0gasoline
Built-in air inflator
Built-in electric jack
Quick charge input,charging time<3 hours
ABS housing in V0 Anti-fire grade
12V10A Supply power for 12V devices
Reverse -charge Protection: No reverse charging back to CarKu unit After the vehicle started.
Reverse Polarity Protection: No damage happened while the clamps are connected in wrong
terminals.
Short-Circuit Protection: Prevent short-circuit occuring while two clamps are connected.
Over-discharge Protection: Effectively prevent over-discharge of the battery in the jump starter.
Over-charge Protection: Effectively prevent over-charge of the battery in the jump starter.
Over-temperature Protection: Automatically stop working when the temperature is getting too
high.
Jump starter Product Specification| Battery Capacity | 12000mAh (44.4Wh) |
| size | 389*226*154.5mm |
| weight | 5600g |
| Input | Quick Charge(5V/2.4A,9V/2A) |
| Output | 12V 10A(12V car electronic products) |
| Jump Starter | 12V |
| Start Current | 200A |
| Peak Current | 400A |
| Operating Temp. | -20ºC~60ºC |
| Lifetime | >1000cycles |
| Full charging time | 3 hours |
| start engine displacement | Diesel:2.5L, gasoline:4.0L |
Air inflator Specification| Operating voltage | DC 12V |
| Max pressure | 150PSI |
| Max current | 10A |
| Flow | 35L/min |
| Length of air hose | 0.65m |
Jack Specification| Rated power | 150W |
| Operating voltage | 12V |
| Max current | 13A |
| Max loading(car weight) | 3T |
| Height Range | 135-365mm/155-450mm |
Product details:
Product accessories:Jump Start Vehicle Instruction:
1.Make sure that the numbers of indicators is not less than 3 ones.
2.Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery
negative (-) terminal.
3.Start the vehicle.
4.When the vehicle is started, remove the jumper cable from Jump Starter and disconnect RED and BALCK clamps
from the vehicle battery. Leave the vehicle's engine running.
Complaint
