| BOBIG POWER CUMMINS DIESEL GENERATOR |
| MODEL | BWC62 | silent type | Open type | +ATS |
| Prime power (KW/KVA) | 45KW/56KVA | $ | $ | $ |
| Standby power (KW/KVA) | 50KW/62KVA | Freight: | $ | |
| The order is bigger,the price is lower |
| General description |
| 1. Engine: WP4.1D50E2 WEICHAI |
| 2. Alternator:BW-224D STAMFORD TYPE |
| 3. Controller: DEEPSEA/Smartgen |
| 4. Electronic speed control |
| 5.:Frequency: 50/60HZ |
| 6. Voltage: 220,230,240,380,400,415v |
| 7. Rated speed: 1500rpm/1800rpm |
| 8. 2*12V batteries, maintennance free type. |
| 9. 24V charge dynamo. |
| 10. Tank:Equipped with 10-12hours operation base tank |
| 11. DIM: silent :2300*1000*1250mm ,open: 2000*710*1350mm |
| 12. Nobise level: 69-72DB@7M ,if need lower noise level,please contact us. |
| 13. Package:Plywood case |
| 14. Voltage,frequency,tank capacity,phase(1phase or 3phase) and color can be made accord with your need |
| PHOTO FOR REFERNCE ONLY |
| Engine specifications: |
| Engine model | WP4.1D50E2 |
| Number of cylinders | 4 |
| Cylinder arrangement | Vertical in line |
| Cycle | 4 |
| Aspiration | Turbo Water Cooling |
| Bore×Stroke(mm×mm) | 102×120 |
| Displacement (Liter) | 3.9 |
| Compression Ratio | 16.5:1 |
| Prime power/speed (kW/RPM) | 50/1500RPM |
| Standby power/speed (kW/RPM) | 55/1500RPM |
| Speed governor | mechanical |
| Cooling system | Positive Water Cooling Cycle |
| Coolant capacity (engine only) (L) | 8 |
| Steady speed droop (%) | 1% |
| Total lubrication system capacity (L) | 11 |
| Oil consumption (g/kw.h) | 0.15% of fuel consumption |
| Fuel consumption at 100% load (g/kw.h) | 235 |
| Fuel consumption at 75% load (g/kw.h) | |
| Fuel consumption at 50% load (g/kw.h) | |
| Starter motor | 24V |
| Dyanmo | 24V |
| ALTERNATOR SPECIFICATION: |
| Compliance with GB755,BS5000,VDE0530,NEMAMG1-22,IED34-1,CSA22.2 and AS1359 |
| Alternator model | BW-224D |
| Exciter type | Single bearing, Brushless, Self-excited |
| Rated output prime power(KVA/KW) | 45kW |
| Rated speed | 1500 RPM |
| Rated frequency | 50 Hz |
| Phase | 3 |
| Rated voltage | 400 V |
| Current(A) | 68 |
| Power factor | 0.8 |
| Voltage adjust range | ≥5% |
| Voltage regulation NL-FL | ≤±1% |
| Insulation grade | H |
| Protection grade | IP23 |
| Control system |
| Standard AMF control panel, including digital LED genset control model: HGM6120U, DSE7320, DSE6020, AMF20, AMF25 |
| Protection | Parameter | PHOTO |
| Low oil pressure | Volt | oil pressure | |
| High water temp | current | oil temp |
| Over speed | power | power factor |
| Over crank | speed | running time |
| Over load | frequency | water temp |
| Over/low volt | | battery voltage |
| Over/low frequency | | |
| battery charge failure | | |
Complaint
