Nylon Conveyor Belt Conveying Belt

Conveyor belt


FEATURES
 
The carcass of this belt is made from cotton/cotton fabric both in warp and weft or terelyene/cotton fabric in warp and cotton fabric in weft
This type of belt will exhibit good flexibility, excellent trough-forming ability and is an economical solution for your conveying needs.
 
APPLICATIONS
Best suited for conveying products in short distance and suitable for but not limited to conveying of powder, granules and weak abrasive materials such assawdust, grain, coal and cements, etc.
Operating temperature: 10°C-60°C
 
BELT TYPES
Belt types include normal, oil resistant, acid and alkali resistant, cold resistant and anti-static grades
TECHNICAL DATA
Standard: In accordance to ISO/FDIS 14890:1990
Performance at Overall Thickness
Belt length can be customized on request and the maximum length is no more than 300 m.

Fabric Type	Ply Thickness (mm)	Nominal Tensile Strength at Overall Thickness (N/mm)					Longitudinal Elongation at Break (%)	Longitudinal Elongation at Rated Stress (%)	Belt Width (mm)	Standard Belt Length (M)
		2ply	3ply	4ply	5ply	6ply
Terylene Cotton TC-70	1.0	140	210	280	350	420	≥10	≤4	300 ~ 1500	200
Cotton    CC-56	1.0	112	168	224	280	336

Performance of Cover Rubber (for General Applications)
Note: The cover rubber performance for other belt types like oil resistant, acid and alkali resistant, cold resistant and
anti-static belt, please refer to the corresponding belt introduction.

Cover Grade	Tensile Strength		Elongation at Break (%) ≥	Abrasion Loss (mm³ ) ≤	Change Rate of Tensile Strength & Elongation after Aging (%)
	(MPa) ≥	(Kg/cm²) ≥
Ordinary Applications (L)	15.0	150.0	350	200	-25 ~ +25
Abrasion Resistant (D)	18.0	180.0	400	100	-25 ~ +25
Extreme Tear Resistant (H)	24.0	240.0	450	120	-25 ~ +25
When cover rubber thickness ranging from 0.8~1.60mm, it allows 15% tolerance of tensile strength. Aging Test: 70ºC×168h.

Adhesion-Ply to Ply

Item	Canvas Ply to Canvas Ply	Cover to Canvas Ply
		Cover Thickness 0.8-1.5mm	Cover Thickness >1.5mm
Average Value of Samples (N/mm) ≥	3.0	2.1	2.7
Minimum Value of Samples (N/mm) ≥	2.7	1.6	2.2
The peak value of all samples are less than 20N/mm.

 
We also have patten conveyor belt.
Type of Pattern:
1) Chevron conveyor belt (Raised & Sunk herringbone)
2) Round pit conveyor belt
3) Diamond conveyor belt


Could you please send me inquiry for details?