1ton Single Speed Electric Chain Block Chain Hosit

Min.Order: 50

Product origin: Hangzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 3891.13 ~ 5002.88

Description

Clutch:As emergency overload protection, clutch will functions and motor will slip when abnormal load.

Inverse phase sequence protecting device:It is the special electrical installation which control the circuit not to work in case of wiring error in the power supply.

Limit switch: The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.

Side magnetic braking device: This device shall realize the instant brake in case of the power dump.

Chain: Japan FEC80 chain ultra heat-treatable steel alloy chain. Lifting height is against your requirement.

Emergency stop button: If any emergencies, press it, the motor circuit will be cut off.

Control voltage: 24V, 36V, 48V, 110V are optional, Low control voltage help to prohibit the emergencies occurring in case of hand switch leakage.

Wireless remote control, and overheat protector can be assembled.

Single speed

Type	Capacity(Ton)	Standard Lifting Height(m)	Lfting Speed (m/min)	Lifting Motor
				Power (Kw)	Rotation Speed(r/min)	Phases	Voltage(V)	Frequency(Hz/s)
DLXDM00501-2S	0.5	3	6.8	0.75	1440	3	200-600	50
DLXDM0101-2S	1	3	6.6	1.5	1440	3	200-600	50
DLXDM0102-2S	1	3	3.4	0.75	1440	3	200-600	50
DLXDM01501-2S	1.5	3	8.8	3.0	1440	3	200-600	50
DLXDM0201-2S	2	3	6.6	3.0	1440	3	200-600	50
DLXDM0202-2S	2	3	3.3	1.5	1440	3	200-600	50
DLXDM02501-2S	2.5	3	5.4	3.0	1440	3	200-600	50
DLXDM0301-2S	3	3	5.4	3.0	1440	3	200-600	50
DLXDM0302-2S	3	3	4.4	3.0	1440	3	200-600	50
DLXDM0303-2S	3	3	2.2	1.5	1440	3	200-600	50
DLXDM0502-2S	5	3	2.7	3.0	1440	3	200-600	50
DLXDM07503-2S	7.5	3	1.8	3.0	1440	3	200-600	50
DLXDM07503-2SD-SD	7.5	3	1.8&0.45	3.0	1440&360	3	200-600	50
DLXDM1004-2S	10	3	2.7	3.0×2	1440	3	200-600	50
DLXDM1004-2SD-SD	10	3	2.7&0.67	3.0×2	1440&360	3	200-600	50
DLXDM1506-2S	15	3	1.8	3.0×2	1440	3	200-600	50
DLXDM1506-2SD-SD	15	3	1.8&0.45	3.0×2	1440&360	3	200-600	50
DLXDM2008-2S	20	3	1.4	3.0×2	1440	3	200-600	50
DLXDM2008-2SD-SD	20	3	1.4&0.35	3.0×2	1440&360	3	200-600	50
DLXDM2510-2S	25	3	1.1	3.0×2	1440	3	200-600	50
DLXDM2510-2SD-SD	25	3	1.1&0.28	3.0×2	1440&360	3	200-600	50
DLXDM3012-2S	30	3	0.9	3.0×2	1440	3	200-600	50
DLXDM3012-2SD-SD	30	3	0.9&0.23	3.0×2	1440&360	3	200-600	50
DLXDM3514-2S	35	3	0.8	3.0×2	1440	3	200-600	50
DLXDM3514-2SD-SD	35	3	0.8&0.2	3.0×2	1440&360	3	200-600	50

Type	Trolley Motor			I-Beam(mm)	Diameter×Chain Fall
	Power(Kw)	Rotation Speed(t/min)	Trolley Speed(m/min)
DLXDM00501-2S	0.4	1440	11/21	58-153	Φ6.3×1
DLXDM0101-2S	0.4	1440	11/21	58-153	Φ7.1×1
DLXDM0102-2S	0.4	1440	11/21	58-153	Φ6.3×2
DLXDM01501-2S	0.4	1440	11/21	58-153	Φ10.0×1
DLXDM0201-2S	0.4	1440	11/21	82-178	Φ10.0×1
DLXDM0202-2S	0.4	1440	11/21	82-178	Φ7.1×2
DLXDM02501-2S	0.75	1440	11/21	82-178	Φ11.2×1
DLXDM0301-2S	0.75	1440	11/21	100-178	Φ11.2×1
DLXDM0302-2S	0.75	1440	11/21	100-178	Φ10.0×2
DLXDM0303-2S	0.75	1440	11/21	100-178	Φ7.1×3
DLXDM0502-2S	0.75	1440	11/21	100-178	Φ11.2×2
DLXDM07503-2S	0.75	1440	11/21	100-178	Φ11.2×3
DLXDM07503-2SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ11.2×3
DLXDM1004-2S	0.75	1440	11/21	150-220	Φ11.2×4
DLXDM1004-2SD-SD	0.75&0.18	2880&720	11/21	150-220	Φ11.2×4
DLXDM1506-2S	0.75×2	1440	11	150-220	Φ11.2×6
DLXDM1506-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×6
DLXDM2008-2S	0.75×2	1440	11	150-220	Φ11.2×8
DLXDM2008-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×8
DLXDM2510-2S	0.75×2	1440	11	150-220	Φ11.2×10
DLXDM2510-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×10
DLXDM3012-2S	0.75×2	1440	11	150-220	Φ11.2×12
DLXDM3012-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×12
DLXDM3514-2S	0.75×2	1440	11	150-220	Φ11.2×14
DLXDM3514-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×14

Dual speeds

Type	Capacity(Ton)	Standard Lifting Height(m)	Lfting Speed (m/min)	Lifting Motor
				Power (Kw)	Rotation Speed(r/min)	Phases	Voltage(V)	Frequency(Hz/s)
DLXDM00501SD-SD	0.5	3	6.8&1.7	0.75	1440&360	3	200-600	50
DLXDM0101SD-SD	1	3	6.6&1.65	1.5	1440&360	3	200-600	50
DLXDM0102SD-SD	1	3	3.4&0.85	0.75	1440&360	3	200-600	50
DLXDM0150SD-SD	1.5	3	8.8&2.2	3.0	1440&360	3	200-600	50
DLXDM0201SD-SD	2	3	6.6&1.65	3.0	1440&360	3	200-600	50
DLXDM0202SD-SD	2	3	3.3&0.82	1.5	1440&360	3	200-600	50
DLXDM0250SD-SD	2.5	3	5.4&1.35	3.0	1440&360	3	200-600	50
DLXDM0301SD-SD	3	3	5.4&1.35	3.0	1440&360	3	200-600	50
DLXDM0302SD-SD	3	3	4.4&1.1	3.0	1440&360	3	200-600	50
DLXDM0303SD-SD	3	3	2.2&0.55	1.5	1440&360	3	200-600	50
DLXDM0502SD-SD	5	3	2.7&0.67	3.0	1440&360	3	200-600	50
DLXDM07503-2S	7.5	3	1.8	3.0	1440	3	200-600	50
DLXDM07503-2SD-SD	7.5	3	1.8&0.45	3.0	1440&360	3	200-600	50
DLXDM1004-2S	10	3	2.7	3.0×2	1440	3	200-600	50
DLXDM1004-2SD-SD	10	3	2.7&0.67	3.0×2	1440&360	3	200-600	50
DLXDM1506-S	15	3	1.8	3.0×2	1440	3	200-600	50
DLXDM1506-2SD-SD	15	3	1.8&0.45	3.0×2	1440&360	3	200-600	50
DLXDM2008-2S	20	3	1.4	3.0×2	1440	3	200-600	50
DLXDM2008-2SD-SD	20	3	1.4&0.35	3.0×2	1440&360	3	200-600	50
DLXDM2510-2S	25	3	1.1	3.0×2	1440	3	200-600	50
DLXDM2510-2SD-SD	25	3	1.1&0.28	3.0×2	1440&360	3	200-600	50
DLXDM3012-2S	30	3	0.9	3.0×2	1440	3	200-600	50
DLXDM3012-2SD-SD	30	3	0.9&0.23	3.0×2	1440&360	3	200-600	50
DLXDM3514-2S	35	3	0.8	3.0×2	1440	3	200-600	50
DLXDM3514-2SD-SD	35	3	0.8&0.2	3.0×2	1440&360	3	200-600	50

Type	Trolley Motor			I-Beam(mm)	Diameter×Chain Fall
	Power(Kw)	Rotation Speed(t/min)	Trolley Speed(m/min)
DLXDM00501SD-SD	0.4&0.1	2880&720	5&20	58-153	Φ6.3×1
DLXDM0101SD-SD	0.4&0.1	2880&720	5&20	58-153	Φ7.1×1
DLXDM0102SD-SD	0.4&0.1	2880&720	5&20	58-153	Φ6.3×2
DLXDM01501SD-SD	0.4&0.1	2880&720	5&20	58-153	Φ10.0×1
DLXDM0201SD-SD	0.4&0.1	2880&720	5&20	82-178	Φ10.0×1
DLXDM0202SD-SD	0.4&0.1	2880&720	5&20	82-178	Φ7.1×2
DLXDM02501SD-SD	0.75&0.18	2880&720	5&20	82-178	Φ11.2×1
DLXDM0301SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ11.2×1
DLXDM0302SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ10.0×2
DLXDM0303SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ7.1×3
DLXDM0502SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ11.2×2
DLXDM07503-2S	0.75	1440	11/21	100-178	Φ11.2×3
DLXDM07503-2SD-SD	0.75&0.18	2880&720	5&20	100-178	Φ11.2×3
DLXDM1004-2S	0.75	1440	11/21	150-220	Φ11.2×4
DLXDM1004-2SD-SD	0.75&0.18	2880&720	11/21	150-220	Φ11.2×4
DLXDM1506-2S	0.75×2	1440	11	150-220	Φ11.2×6
DLXDM1506-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×6
DLXDM2008-2S	0.75×2	1440	11	150-220	Φ11.2×8
DLXDM2008-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×8
DLXDM2510-2S	0.75×2	1440	11	150-220	Φ11.2×10
DLXDM2510-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×10
DLXDM3012-2S	0.75×2	1440	11	150-220	Φ11.2×12
DLXDM3012-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×12
DLXDM3514-2S	0.75×2	1440	11	150-220	Φ11.2×14
DLXDM3514-2SD-SD	(0.75&0.18)×2	2880&720	5&20	150-220	Φ11.2×14

Certifications

Details Images
DLXDM series hoists Features

The Quality comparison of spare parts

Customized Service

Factory

Usage

Payment

Our Service

FAQ
Q1. What's information should I provide to get the price?
A:1. Chain quality? 2.the chain size? 3. the working voltage? 4. the machine frequency?

Q2. What's the lead time for regular order?
A: The normal delivery time is 60-120 days. If you have special needs or if the quantity is greater than 1 set, please explain
when making an inquiry. When we quote, we will provide you with accurate delivery time according to the actual situation.

Q3. The space of my workshop is limited, can the machine is ok for me?
A: We have been specializing in European machines for 20 years. Machines are one of the biggest features of our products.According to your needs, our designers will tailor-made products suitable for your use.

Q4.Can you provide lifting tools?
A: Yes, we can provide any type of lifting tools such as Manual chain hoists, manual lever chain hoist, electric chains
hoists,chains, slings, hooks, electromagnetics, grabs, beams, etc.non-standard fixtures, etc... Welcome to consult

Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q6. Are there any professional technicians to assist our installation?
A: Yes. We have a professional installation team, who has already been to many countries to assist the installation. If you need our technicians to offer this service, please let us know in advance. So that we can arrange the suitable technicians to your country.

Q7. How do you ship the goods and how long does it take to arrive?
A: Small products can be transported by air, and large products can be transported by sea. According to different countries and regions, the specific time will be confirmed according to the actual situation.

Q8. What is your terms of payment?
A: Payment<=1000usd, 100="">=1000USD, 30% T/T in advance ,balance before shipment. We'll show you the photos or videos of the products and packages before you pay the balance.

Q9. What is your terms of packing?
A: Generally, we pack our goods in neutral wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. There is no package of big machines,there are just protective covers.

Q10. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q11. How to proceed an order for hoist?
A: Firstly let us know your requirements or application:Hoists capacity, chains length and others? Secondly We quote according to your requirements or our suggestions.Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.

Q12. Do you offer guarantee for the products?
A: Yes, we offer 1-3 years warranty to our products.

Forward

Related products