Complaint
| Inverter Model | Power (kW ) | Gross Weight (kg) | Packing Size (mm ) | Gross Weight (kg) | Net Weight (kg) |
| ZVF300-G250/P280T4M | 250/280kW 380V | 230.0kg | 1760*775*510mm/1PCS | 248kg | 230kg |
| Inverter Model | Power (KW) G/P | Current (A) | Dimension (mm) | |||||
| H | H1 | W | W1 | D | d | |||
| ZVF300-G250/P280T4M | 250/280 | 470/520 | 1600 | 660 | 415 | |||
| Item | Item Description | |
| Control Function | Automatic energy-saving operation | Auto optimize V/F curve according to the load changes to realize the energy saving operation. |
| Auto voltage regulation(AVR) | When the network voltage changes, it can regulate PWM output automatically to maintain constant voltage. | |
| Built-in PID | This can form a convenient closed-loop control system (CLCS)and is applicable to pressure control, flow control and other process control . | |
| Operation Function | Operating command | Operation panel control ,external terminal control and COM control |
| Frequency setting | Keypad potentiometer setting , operation panel setting,. external terminal UP/DOWN setting, analog voltage signal or external potentiometer setting , analog current signal setting .terminal combination setting ,485 COM setting and so on. | |
| Input Signal | Forward/Reverse signal\multi-speed signal \fault signal \ reset signal etc. | |
| Output signal | Programmable relay\open collector output \Fault signal output. | |
| Multi-function analog and digital output terminal | This can realize the output of frequency current and other physical quantity by output 0-10V or 0-20mA DC signal and 0-10KHz digital signal output. | |
| Braking function | Dynamic braking | With an external braking resistor, the maximum braking torque may reach 100%. |
| DC Braking | This can be selected when the motor starts or stops with the action frequency of 0-20Hz,action current level of 0-100% and actuation time of 0-30sec., which can be set in sequence. | |
| Other Function | Skip frequency\Jog function\Counter \Rotation speed tracking\Momentary power loss restart \Frequency upper/lower limiting\Acceleration/ Deceleration mode can be adjusted \Frequency meter and Voltmeter output \Multi-speed/ program running \Two wire mode/ three wire mode control \Wobble frequency control\Multi-function input terminal selection \Fault auto reset\RS485 serial communication . | |
| Protection Function | Input phase loss protection\Over current protection \Overload protection\Over voltage protection \Under voltage protection\Over heat protection ect. | |
