Rooftop Air Conditioner for Power Distribution Cabinet

Min.Order: 1

Product origin: Shanghai, China

Infringement complaint:

Complaint

US$ 478 ~ 585

Description

packaged heat pump type rooftop air conditioner Description:

1. Air cooled rooftop air conditioner.
2. Cooling capacity: 8kw to 90kw, a variety of choices.
3. High external pressure.
4. Applicable to residential and commercial buildings, hotels, and scientific research units, factories and enterprises and so on.

GT-WKR Series-Roof Top AH Specifiaction 1
Model GT-WKR-				40
Specification	Cooling capacity 1*		kW	42
	Heating capacity 2*		kW	44.1
	Supply air 3*		m3/h	7000
	Static pressure 3*		Pa	300
	Noise 4*		dB(A)	68
	Power			3N-380V-50Hz
	Total capacity			17.24
	Color			White
cooling system	Compressor	Type		Efficient scroll closed
	Compressor	Quantity		2
	Supply air fan	Type		Low noise centrifugal type
	Supply air fan	Capacity	kW	2.2
	Evaporator	Type		Inner grooved copper tube and aluminum fin
	Evaporator	Fin type 5*		Slotted fin hydrophilic aluminum fin
	Condenser	Type		Inner grooved copper tube and aluminum fin
	Condenser	Fin type 5*		Rippled hydrophilic aluminum fin
	Condenser fan	Type		Low noise axial type
	Condenser fan	Quantity		2
	Refrigerant	Refrigerant		R22/R407C
	Refrigerant	Refrigerant control		External balance type thermal expansion valve
Air filter				Initially effect plate filter
Dimensions		L	mm	2200
		W	mm	1800
		H	mm	1520
Weight			kg	850

packaged heat pump type rooftop air conditioner Features:
1. It is packaged air conditioner which integrates condensing part, evaporating part & control part into a whole unit, firstly promoted & applied in South America, North Europe & Australia.

2. It is air cooled direct evaporation & expansion air conditioner, has no need on cooling water & chilled water system, dispenses with cooling tower/cooling water pump/chilled water pump, relative pipe work, electric control & terminal equipments, saves user investment.

3. It integrates evaporating part & condensing part into a whole unit which is installed outside to save indoor space, user will only need to install the duct, no need to connect refrigerant pipe work, it works under intellectual control without special care.

Application range:
It is mainly applied to factories, schools, auditoriums, warehouses, etc.

Structure:
1. Panels and frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
2. Direct expansion coils with condensate drain tray.

Hermetic compressor
1. High efficiency scroll compressor for the whole range, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration dampers.
2. Ripple type acoustic insulation for compressor section, and thermal insulation for coil and fan section, low noise.

Centrifugal fan
1. Forward curve centrifugal fans for air treatment section and axial fans for condensation section.
2. Front, side and underside air discharge of the treatment unit.
3. High external pressure, long air supply distance.

Electric panel
1. Electric panel consists of breakers and contactors for compressors and fan motors, phase sequence relay and other necessary protection devices for the main components
2. Easy operation line controller
3. Cooling/Heating/Auto
3. Error indication
4. Timing on/off

Optional
1. Economizer with fresh, return air dampers and fresh air hood
2. Free cooling function for low ambient temperature
3. Low ambient control device for operation of outdoor units at ambient temperatures from less than 20C down to -10C
4. BMS devices
4. T3 (Tropical climate)
5. Condenser coil guard
6. Roof curb
7. Metal / aluminum filter
8. Air pressure switch for indoor fan
9. High static condenser fan option with sealed + drain condensing section
10. Optional water heating coil
11. Metal or plastic mesh on condenser coil
12. Optional supply / return air configurations
13. Upgraded evaporator fan motor drives
14. G4 filter, plate and bag filter

Forward

Related products