Description
Components for the Machine:
The rollition driven forming stations, pressing die, cutting equipment, hydraulic station, PLC console and manual unload product run out table.
Material specification
Aluminum, alu-zinc, galvanized and pre-painted galvanized steel.
Thickness
0.3-0.7mm.(perfect is 0.4mm-0.6mm)
Main motor power
4kw
Hydraulic station power
3kw.
Feeding width
1200mm.
Cover width
900mm
Yield stress
235Mpa (33KSI) ~ 345Mpa (50KSI).
Roll forming Speed
12 m/min
Cutting Tolerance
+/-2.5mm(length≤5000mm); +/-3.0mm(5000mm<length≤10000mm).
Manual Uncoiler
Max. Capacity: 5000kgs.
Coil inner diameter
508mm.
Voltage
380V,3 Phase,50HZ,Or As per customer's request.
Numbers of stands
at least 17 stands/ stations
Type of cutting
Roll-formed and length-set profile cutting.
Material of Main Equipment:
Roller Material
High grade S45C forged steel, coated with hard chrome.
Active Shaft Material
High grade S45C carbon wrought steel, diameter 76mm.
Electric Elements
PLC control console, touch screen and transducer, from Siemens, Germany.
Other elements, from Schneider Electric, Germany.
Cutter Blades
Cr12MoV steel with quenched treatment, hardness HRC58~61,
wear-resistance, good steel structure, long life.
Process Sketch
Uncoiling the sheet -Infeed guiding -Roll forming -Measure length - Cutting the panel - Panels to the supporter (option: automatic stacker).
Packaging & Shipping
1.One 40ft container for loading one set machine with manual decoiler;
2.The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3.Spare parts and some small parts packed in plastic tooling box;
4.All Components Fixed by steel wire with Container.
Complaint
