Complaint
| Parameters | Unit | KGS1020AHD | |
| Working Surface of Table | mm | 255×510 (10"×20") | |
| Max.Table Travel | mm | 560 | |
| Max.Cross Travel | mm | 280 | |
| Distance Between Table Surface and Spindle Center | mm | 535 | |
| Max.Table Load | kgs | 300 | |
| T-Solt (Number×Width) | mm | 1×14 | |
| Table Speed | m/min | 5~25 | |
| Cross feed Handwheel | 1gard | mm | 0.02 |
| 1 rev | 5 | ||
| Automatic Cross feed of Saddle | mm | 0.5~12 | |
| Power Cross Feed | 50HZ | mm/min | 790 |
| 60HZ | 950 | ||
| Grinding Wheel Dimensions | mm | 200×25×32/31.75 | |
| Spindle Speed | 50HZ | rpm | 2850 |
| 60HZ | 3420 | ||
| Vertical Handwheel | 1gard | mm | 0.01 |
| 1 rev | 2 | ||
| Automatic Down Feed Rate | mm | 0.002~0.2 | |
| Power Head Increment | mm/min | - | |
| Spindle Motor | kw | 2.2 | |
| Vertical Motor | w | - | |
| Hydraulic Motor | kw | 1.5 | |
| Dust Collection Motor | w | 550 | |
| Coolant Motor | w | 90 | |
| Crossfeed Motor | w | 60 | |
| Floor Space | mm | 1900×2300 | |
| Packing Dimensions | mm | 1960×1610×2140 | |
| Net Weight | kgs | 1680 | |
| Gross Weight | kgs | 1930 | |
| 1 | Grinding wheel | 2 | Wheel flange |
| 3 | Wheel balancing base | 4 | Wheel balancing arbor |
| 5 | Extractor | 6 | Diamond dresser |
| 7 | Leveling pad | 8 | Anchor bolt |
| 9 | Tool box with tools | 10 | Electric magnetic chuck |
| 11 | Cooling system | 12 | Working light |
| Serial No. | Name of Article |
| 1 | rear splash guard |
| 2 | DRO (digital read out) |
| 3 | overhead parallel dresser |
| 4 | hydraulic tank oil cooling |
| 5 | cooling & suction device |
| 6 | magnetic separator |
| 7 | cooling magnetic paper filter |
| Note | 6 and 7, select one just OK. |
