IC components LPC1754FBD80,551 ARM CORTEX-M3

Description

LPC1754FBD80,551:  MCU 32-bit LPC1700 ARM Cortex M3 RISC 128KB Flash 2.5V/3.3V 80-Pin LQFP Tray 

Package: LQFP-80

Mfr. Part#: LPC1754FBD80,551

Datasheet: (e-mail or chat us for PDF file)

ROHS Status: 

Quality: 100% Original

Warranty: 180 days

The LPC1754 is a Cortex-M3 microcontroller for embedded applications featuring a high level of integration and low power consumption at frequencies of 100 MHz. Features include 128 kB of flash memory, 32 kB of data memory, USB Device/Host/OTG, 8-channel DMA controller, 4 UARTs, 1 CAN channels, 2 SSP, 1 SPI, 2 I2C, 8-channel 12-bit ADC, DAC, motor control PWM, Quadrature Encoder interface, 4 general purpose timers, 6-output general purpose PWM, ultra-low power Real-Time Clock with separate battery supply, and up to 52 general purpose I/O pins.

Key Features

• ARM Cortex-M3 processor, running at frequencies of up to 100 MHz
• ARM Cortex-M3 built-in Nested Vectored Interrupt Controller (NVIC)
• Up to 128 kB on-chip flash programming memory
• Up to 32 kB of SRAM
• In-System Programming (ISP) and In-Application Programming (IAP)
• Eight channel General Purpose DMA controller (GPDMA)
• Multilayer AHB matrix interconnect provides a separate bus for each AHB master
• Split APB bus allows high throughput with few stalls between the CPU and DMA
• USB 2.0 full-speed device/Host/OTG controller with dedicated DMA controller
• Four UARTs with fractional baud rate generation
• CAN 2.0B controller with one channel
• SPI controller with synchronous, serial, full duplex communication
• Two SSP controllers with FIFO and multi-protocol capabilities
• Two I2C-bus interfaces supporting fast mode with a data rate of 400 kbit/s
• 52 General Purpose I/O (GPIO) pins with configurable pull-up/down resistors
• 12-bit Analog-to-Digital Converter (ADC) with conversion rates up to 200 kHz
• 10-bit Digital-to-Analog Converter (DAC)
• Four general purpose timers/counters
• One motor control PWM with support for three-phase motor control
• Quadrature encoder interface that can monitor one external quadrature encoder
• One standard PWM/timer block with external count input
• Real-Time Clock (RTC)
• WatchDog Timer (WDT)
• ARM Cortex-M3 system tick timer, including an external clock input option
• Standard JTAG test/debug interface
• Integrated PMU (Power Management Unit)
• Four reduced power modes
• Single 3.3 V power supply (2.4 V to 3.6 V)
• One external interrupt input configurable as edge/level sensitive
• Non-maskable Interrupt (NMI) input
• Wakeup Interrupt Controller (WIC)
• Processor wake-up from Power-down mode via any interrupt
• Brownout detect with separate threshold for interrupt and forced reset
• Power-On Reset (POR)
• Crystal oscillator with an operating range of 1 MHz to 25 MHz
• 4 MHz internal RC oscillator trimmed to 1 % accuracy
• PLL allows CPU operation up to the maximum CPU rate
• USB PLL for added flexibility
• Code Read Protection (CRP) with different security levels
• Unique device serial number for identification purposes

Company Product Line

Certificates




 

Why choosing us

• Located in Shenzhen, the electronic market center of China.
• 100% guarantee components quality: Genuine Original.
• Sufficient stock on your urgent demand.
• Sophisticated colleagues help you solve problems to reduce your risk with on-demand manufacturing
• Faster shipment: In stock components can ship the same day .
• 24 Hours service 

Notice:

1. Product images are for reference only.
2. You can contact sales person to apply for a better price.
3.  For more products, Pls do not hesitate to contact our Sales team.